تم اصلاح مشكل شاشة صفراء لــــ جهازGU230 العنيد
Welcome to Z3X LG Multi Platform TOOL
Current OS : Windows Seven BUILD:6/7600
Welcome to Sgold3 Module!!
Disconnected.
TIP: Please reconnect phone battery / power source.
Count supported models - 134
Repairing IMEI... , phone must be powered on!
Operaing VIA: COM9 , Z3X BOX Serial Port (COM9)
Config :
Current IMEI:356114044215464
Reading phone...
Phone platform:INFINEON
Phone IMEI:356114044215464
Phone Secondary IMEI:356114044215464
Phone S/N:35611404421546400
Phone SW VER.:GU230AT-00-V10c-604-01-MAR-04-2011+0
Phone HW VER.:1.0
Bluetooth Adress:aecd8819139e
Operation Done!
Sending reset command , phone must be powered on!
Current IMEI:
Result is: OK
Loading module , please wait...
PMB8810 Module 1.1 started. SW: Ver 3.7.0.0
Connecting to LG GU230 in UART Mode (COM9 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8810) prebooting...
Release power button. Booting...
Waiting for loader answer...
Reading info...
Flash ID: 0x8981
Force boot mode on!
Finished in 12 seconds
Unlocking...
Reading EEPROM....
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\LG GU230_autobackup_25102011_173812.eep
Analising EEPROM...
Phone IMEI:3561140442154640
SimLock Data Cleared!
Erasing EEPROM....
Erasing done!
Writing EEPROM....
Unlock done!
Finished in 21 seconds
Opening "BIN_GU230AT-00-V10q-ARE-XXX-JUL-19-2010+0.bin"...
Erasing Firmware...
Error of setting up adress! No answer from Boot
Finished in 23 seconds
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8810 Module 1.1 started. SW: Ver 3.7.0.0
Connecting to LG GU230 in UART Mode (COM9 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8810) prebooting...
Release power button. Booting...
Waiting for loader answer...
Reading info...
Flash ID: 0x8981
Force boot mode on!
Finished in 12 seconds
Opening "BIN_GU230AT-00-V10q-ARE-XXX-JUL-19-2010+0.bin"...
Erasing Firmware...
Erasing done!
Writing Firmware...
Writing done!
Finished in 28 minutes 49 seconds.
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8810 Module 1.1 started. SW: Ver 3.7.0.0
Connecting to LG GU230 in UART Mode (COM9 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8810) prebooting...
Release power button. Booting...
Waiting for loader answer...
Reading info...
Flash ID: 0x8981
Force boot mode on!
Finished in 18 seconds
Detailed EEPROM Information:
EEPROM Model:
EEPROM Manufacturer:
EEPROM Version:
EEPROM IMEI : ?????????????????
EEPROM BT Adress : 00:00:00:00:00:00
Detailed Codes Information:
EEPROM NCK Code : 0000-0000
EEPROM NS Code : 0000-0000
EEPROM SP Code : 0000-0000
EEPROM CP Code : 0000-0000
EEPROM SIM Code : 0000-0000
Ready.
Opening "XMM2130.eep"...
Erasing EEPROM...
Erasing done!
Writing EEPROM...
Writing done!
Finished in 1 seconds
المفضلات