REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Repair DRK
Selected model: SM-G920T
Software version: 27.7
Checking local file... not found
Searching server... Ok
Downloading file... Ok
Checking local file... Ok
Searching USB Flash interface... COM22 detected
Setup connection... Ok
Reading data from phone... Ok
Sending data to phone... Ok
Sending data to phone... Ok
Waiting ADB device... Ok
Reading phone info...
Recovery build version: 6.0.1
Boot version: G920TUES5DPI2
Platform: exynos7420
Boot serial: 05157df532cba123
Product board: zerolte
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Checking DRK status... NG!
Writing DRK... Ok
Checking DRK status...
Repairing DMVT key... Ok
Rebooting phone... Ok
Repair DRK done
Done with Samsung Tool PRO v.27.7
مشكلة في اصلاح DRK Samsung s6 Tmobile SM-G920T
.gif)
المشاركة الأصلية كتبت بواسطة LYON
المفضلات