i9060i mtk فلاشة

[bil34]

سلام عليكم
الرجاء المساعدة في ايجاد هذه الفلاشة
وهذه معلومات الجهاز:
infoo:nalysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000


PRELOADER: addr:0x000000 --length:0x080000
PRO_INFO: addr:0x080000 --length:0x100000
NVRAM: addr:0x180000 --length:0x180000
PROTECT_F: addr:0x300000 --length:0x180000
PROTECT_S: addr:0x480000 --length:0x180000
SECCFG: addr:0x600000 --length:0x020000
UBOOT: addr:0x620000 --length:0x060000
BOOTIMG: addr:0x680000 --length:0x600000
RECOVERY: addr:0xC80000 --length:0x600000
SEC_RO: addr:0x1280000 --length:0x040000
MISC: addr:0x12C0000 --length:0x060000
LOGO: addr:0x1320000 --length:0x100000
EXPDB: addr:0x1420000 --length:0x200000
FAT: addr:0x1620000 --length:0x1900000
ANDROID: addr:0x2F20000 --length:0x13B00000
CACHE: addr:0x16A20000 --length:0x700000
USRDATA: addr:0x17120000 --length:0x84A0000
BMTPOOL: addr:0xFFFF0050 --length:0x000000


>>Format addr:0x17120000 --Format length:0x7AA0000

[‏ASEM DANIAL]

ما مشكلة الجهاز

[bil34]

كن يشتغل واقف على السمسونغ لكن بعد عملية الفلاش انطفاء تمام
لكن يستجب مع الكمبوتر

[بشرى عبدالرحمن]

سلام عليكم
الرجاء المساعدة في ايجاد هذه الفلاشة
وهذه معلومات الجهاز:
infoo:nalysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000


PRELOADER: addr:0x000000 --length:0x080000
PRO_INFO: addr:0x080000 --length:0x100000
NVRAM: addr:0x180000 --length:0x180000
PROTECT_F: addr:0x300000 --length:0x180000
PROTECT_S: addr:0x480000 --length:0x180000
SECCFG: addr:0x600000 --length:0x020000
UBOOT: addr:0x620000 --length:0x060000
BOOTIMG: addr:0x680000 --length:0x600000
RECOVERY: addr:0xC80000 --length:0x600000
SEC_RO: addr:0x1280000 --length:0x040000
MISC: addr:0x12C0000 --length:0x060000
LOGO: addr:0x1320000 --length:0x100000
EXPDB: addr:0x1420000 --length:0x200000
FAT: addr:0x1620000 --length:0x1900000
ANDROID: addr:0x2F20000 --length:0x13B00000
CACHE: addr:0x16A20000 --length:0x700000
USRDATA: addr:0x17120000 --length:0x84A0000
BMTPOOL: addr:0xFFFF0050 --length:0x000000


>>Format addr:0x17120000 --Format length:0x7AA0000

عامل بيكب للفلاشه الاصليه يابرنس قبل التفليش

[gackgois]

MT6572__samsung__GT-I9060I__GT-I9060I__4.4.4__ALPS.JB3.MP.V1 - Download - 4shared

معلومات الهاتف
Scatter Load Ok , BaseBand : MT6572 , Project : sanstar72_wet_lca , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!


Operation : Flash [ v1.30 ]


======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 98 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100534A5330304D00799C7B995FA9
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00799C7B995FA9
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


ScatCFG : BaseBand : MT6572 , Project : sanstar72_wet_lca , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled


BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!


Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

[bil34]

على فكرة الانفو قبل الفلاشة
هل من حل يااخوني