TECNO P5+ لا يقبل التفليش
السلام عليكم ممكن حل
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM13)
Please Hold "ON" to connect with the phone...USB
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
Nand Flash Type: NAND_NEW_0072
Nand Flash Code: 009800BC(00900066)
Nand Flash Size: 0x21000000 Hex Bytes
INT/EXT RAM Size: 0xC4800+0x0
Waiting for USB Port...
Set MediaTek DA USB VCOM Port (COM16)
Set MTK USB Port (COM1)
Please Hold "ON" to connect with the phone...
Not Supported
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM13)
Please Hold "ON" to connect with the phone...
Waiting for USB Port...
Connecting to Phone,Wait..ok
Connecting AT Mode
Hardware:mt6572
Board:c2_wvga_nand_lca
CPU ABI:armeabi-v7a
Manufacturer:tecno_p5_plus
Model:tecno_p5_plus
Android Ver:4.2.2
bootloader ver:unknown
USB config:1
Hardware:mt6572
User:hdt
FS:unknown
Build number:tecno_p5_plus
Board:c2_wvga_nand_lca
ID:jdq39
Region:us
CPU ABI:armeabi-v7a
Language:en
Chipset:
Manufacturer:tecno_p5_plus
Model:tecno_p5_plus
Android Ver:4.2.2
bootloader ver:unknown
USB config:1
User:hdt
FS:unknown
Build number:tecno_p5_plus
ID:jdq39
Region:us
Language:en
Chipset:
Test Mode, Reading Information From the Phone...
Infr: MT6572_MOLY.WR8.W1315.MD.WG.MP.V21.P2_GXQ72_WET_JB3_GPRS_HW_Unknown
Reading(Backuping) NV data...
Root: Not Root
Done
Root: Not Root
Done
>>Abort by User
مع العلم اني نزلت الفلاشات الموجودة في [Hovatek] Stock backup (MTK) for Tecno P5 Plus
ممكن حل
رد مع اقتباس
المشاركة الأصلية كتبت بواسطة SALIHMOB
المفضلات