ازالة حساب جوجل لجهاز Huawei y8s jkm-l21x 9.1.0.362 ‬بالتيست بوينت

[ProfKefah]

السلام عليكم

Welcome to Octoplus Huawei Software v.‪1.3.4‬


To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode


To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode


To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'


Found COM ports:
1: COM1 Communications Port
2: COM14 USB Serial Port


Job ID: 000000000225BB11
2023-08-09 17:26:04
Starting Reset FRP
Selected phone model: ‪JKM-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: PPF6R20429024868
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JKM-LX1‬
System: ‪JKM-LGRP2-OVS 9.1.0.299‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.362‬
Custom Version: ‪JKM-LX1-CUST 9.1.0.2(C185)‬
Preload Version: ‪JKM-L21X-PRELOAD 9.1.0.2(C185R1)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: PROFKEFAH
Checking balance...
Your balance: 200 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JKM-LX1‬
System: ‪JKM-LGRP2-OVS 9.1.0.299‬




S/N: ‪PPF6R20429024868‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

[onoff]

الله يوسع عليك