ازالة قفل FRP لجهاز Huawei Y3 2017 CRO-U00

[ProfKefah]

Device Model: HUAWEI CRO-U00
Device Serial: CAX9K18B07900111
Device Firmware: Cairo-U00C185B128
S/N: 41DEDF35 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.38c7


Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 4 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok


Check for updates...
Installed v2.38 Latest v2.38 Required card v0153
You have latest version [2.38] installed


Telegram Channel: @infinityBox
Telegram Group: @infinityBoxTalks


Account: https://infinity-box.com/service/


Update configuration...
Configuration [12170] updated
Load IDBase v124493 Ok




Operation: Reset Settings/Format FS [ v2.38c7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...


PTFN: MediaTek USB Port (COM9)
MODE: BOOTROM; PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: 0DEF3DEA0BE0790936E68CE28D93BC20
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x00000001
AGENT: 0_base: BASE_v2112 | Manual: Off
[0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 460001154D32364E7A9306428575FDCE
DAInf: v4.2.156
DA: EXT_RAM NOT initialized
NAND: OK
NAND: 01154D32364E7A9306428575
eMMC: OK
eMMC: 00000000000000000000000000000000
DRAM: 0x00BC
EMI: FireFly preloader_cro.bin with 10 memory type(s) supported
00: ID: 90014A483847316505 Ven: Hynix | Dev: H8G1e RAM: [ 1.00 GB ]
01: ID: 110100303038473730 Ven: Toshiba | Dev: 008G70 RAM: [ 1.00 GB ]
02: ID: 150100464E31324D42 Ven: Samsung | Dev: FN12MB RAM: [ 1.00 GB ]
03: ID: 150100464E58324D42 Ven: Samsung | Dev: FNX2MB RAM: [ 1.00 GB ]
04: ID: 90014A483847346132 Ven: Hynix | Dev: H8G4a2 RAM: [ 1.00 GB ]
05: ID: 90014A484147346132 Ven: Hynix | Dev: HAG4a2 RAM: [ 2.00 GB ]
06: ID: 150100514531334D42 Ven: Samsung | Dev: QE13MB RAM: [ 2.00 GB ]
07: ID: 150100464531324D42 Ven: Samsung | Dev: FE12MB RAM: [ 1.00 GB ]
08: ID: 150100464536324D42 Ven: Samsung | Dev: FE62MB RAM: [ 1.00 GB ]
09: ID: 150100464E36324D42 Ven: Samsung | Dev: FN62MB RAM: [ 1.00 GB ]
EMI: Init EMI from PRELOADER
INIT: 0xBC DRAM [ 0x00000000 [ 0 B ] ]
DRAM: DRAM 0x40000000 [ 1.00 GB ]
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info


EMMC:
CID: 150100464E36324D4206937ACEFD7585
VEN: Samsung OEM: 0 ID: 464E36324D42 [FN62MB] PRV: 0x06
SNN: 2474299133 [0x937ACEFD] MF: 7/2018
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00080000 [ 512.00 KB ]
USER: 0x1D2000000 [ 7.28 GB ]


SRAM 0x00020000 [ 128.00 KB ]
DRAM 0x40000000 [ 1.00 GB ]


CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: E0BF69B36F7F1B8B726401A1CAF87485
MEID: 0DEF3DEA0BE0790936E68CE28D93BC20
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT


DA: USB: FULL-SPEED
DA: USB: Change Port Speed
Error: Failed to setup HS_USB port
Error: Fail to init protocol
Disconnect battery and cable
Check USB drivers - Change cable - Change USB port - Do not use USB-hub
Try again
Reconnect Power/Cable now


Reading...
Reset Mode: Safe (OnDevice-Like) reset by device requirements: UserData + FRP


Operation: Reset Settings/Format FS [ v2.38c7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...


PTFN: MediaTek DA USB VCOM (Android) (COM6)
MODE: PRELOADER PORT; PORT: 6
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init BROM
Error: Fail to init protocol
Disconnect battery and cable
Check USB drivers - Change cable - Change USB port - Do not use USB-hub
Try again
Reconnect Power/Cable now




Operation: Reset Settings/Format FS [ v2.38c7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...


PTFN: MediaTek USB Port (COM9)
MODE: BOOTROM; PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: 0DEF3DEA0BE0790936E68CE28D93BC20
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x00000001
AGENT: 0_base: BASE_v2112 | Manual: Off
[0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
NAND: DEVICE NOT FOUND
eMMC: OK
eMMC: 460001154D32364E7A9306428575FDCE
DAInf: v4.2.156
DA: EXT_RAM NOT initialized
NAND: OK
NAND: 01154D32364E7A9306428575
eMMC: OK
eMMC: 00000000000000000000000000000000
DRAM: 0x00BC
EMI: FireFly preloader_cro.bin with 10 memory type(s) supported
00: ID: 90014A483847316505 Ven: Hynix | Dev: H8G1e RAM: [ 1.00 GB ]
01: ID: 110100303038473730 Ven: Toshiba | Dev: 008G70 RAM: [ 1.00 GB ]
02: ID: 150100464E31324D42 Ven: Samsung | Dev: FN12MB RAM: [ 1.00 GB ]
03: ID: 150100464E58324D42 Ven: Samsung | Dev: FNX2MB RAM: [ 1.00 GB ]
04: ID: 90014A483847346132 Ven: Hynix | Dev: H8G4a2 RAM: [ 1.00 GB ]
05: ID: 90014A484147346132 Ven: Hynix | Dev: HAG4a2 RAM: [ 2.00 GB ]
06: ID: 150100514531334D42 Ven: Samsung | Dev: QE13MB RAM: [ 2.00 GB ]
07: ID: 150100464531324D42 Ven: Samsung | Dev: FE12MB RAM: [ 1.00 GB ]
08: ID: 150100464536324D42 Ven: Samsung | Dev: FE62MB RAM: [ 1.00 GB ]
09: ID: 150100464E36324D42 Ven: Samsung | Dev: FN62MB RAM: [ 1.00 GB ]
EMI: Init EMI from PRELOADER
INIT: 0xBC DRAM [ 0x00000000 [ 0 B ] ]
DRAM: DRAM 0x40000000 [ 1.00 GB ]
DA: DRAM ready
DA: BOOT to 2nd DA...
DA: Receiving HW info


EMMC:
CID: 150100464E36324D4206937ACEFD7585
VEN: Samsung OEM: 0 ID: 464E36324D42 [FN62MB] PRV: 0x06
SNN: 2474299133 [0x937ACEFD] MF: 7/2018
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00080000 [ 512.00 KB ]
USER: 0x1D2000000 [ 7.28 GB ]


SRAM 0x00020000 [ 128.00 KB ]
DRAM 0x40000000 [ 1.00 GB ]


CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: E0BF69B36F7F1B8B726401A1CAF87485
MEID: 0DEF3DEA0BE0790936E68CE28D93BC20
DA: STATUS: BLANK FLASH; BSTYLE: EMMC FLASH BOOT


DA: USB: FULL-SPEED
DA: USB: Change Port Speed
PTFN: MediaTek DA USB VCOM (Android) (COM6)
MODE: PRELOADER PORT; PORT: 6
Boot done [0]


Reading...
Ok
Reading...
Scan memory...
Found region: 10824 [10824|0|0]
Scan filesystem...
SmartInfo: AndroidVer: 6 UserDataFS: 0x01 CacheFS: 0x01
Strategy: 7


Verify device config...
Ok
Loaders Ok


Backup [20] to C:\InfinityBox\CM2MT2\backup\MT6580__0DEF3DEA0BE07 90936E68CE28D93BC20\
[3] Read: NVRAM
[18] Read: NVDATA
[2] Read: PROINFO
[7] Read: LK
[4] Read: PROTECT1
[0] Read: PRELOADER
Done 6 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6580__0DEF3DEA0BE07 90936E68CE28D93BC20\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6580__0DEF3DEA0BE07 90936E68CE28D93BC20.7z
Verified


Process: RESET PROTECTION...
Format Ok: RESET PROTECTION
Process: USERDATA...
Format Ok: USERDATA
Process: CACHE...
Format Ok: CACHE
Process: USERDATA...
Format Ok: USERDATA
Done: 00:01:06
Reconnect Power/Cable now

[Abo Amir]

الله ينور عليك