.gif)
ازالة قفل FRP لجهاز meizu m10
السلام عليكم
والجهاز مطفئ
وصله بالحاسوب
كود:gui: Default Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36 Load IDBase v723487 Ok Update configuration... Configuration [12060] updated Load IDBase v723487 Ok Operation : Identify Device [ v2.36 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM42) MODE: PRELOADER PORT PORT: 42 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000001 BROM: SecMode : SBC BROM: BROM|BL : 0xFF|0x02 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek USB Port (COM45) MODE: BOOTROM PORT: 45 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B BROM: SecLevel : 0x000000E1 BROM: SecMode : SBC+EXT BROM: BROM|BL : 0x05|0xFE BROM: BOOTROM BROM: EMI : Search BROM: EMI : Found AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed DA : BOOT to 2nd DA... DA : 2ND stage confirmed DA : SYNC with DA passed DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID: 8F010055593543533010E01A356A8635 EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10 EMMC: VEN: Unknown 0x008F : UY5CS0 EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x750000000 [ 29.25 GB ] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] RNID: E123AFF0C99F0237AD5C89A8347A755D DA: USB : FULL-SPEED DA: USB : Change Port Speed PTFN: MediaTek DA USB VCOM (Android) (COM43) MODE: PRELOADER PORT PORT: 43 Boot done Verify device config... Ok No loaders to verify STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : NOT Enabled! STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE] Scan preloader... Preloader: EMI: MT6757 preloader_sm6757c_64.bin with 5 memory type(s) supported EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 0 B ] EMI[01] : eMMC : DDR3 : ID: 150100475836424D42 : Ven: Samsung | Dev: GX6BMB : RAM: [ 3.00 GB ] EMI[02] : eMMC : DDR3 : ID: 150100474436424D42 : Ven: Samsung | Dev: GD6BMB : RAM: [ 3.00 GB ] EMI[03] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 3.00 GB ] EMI[04] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 2.00 GB ] Preloader saved to: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_sm6757c_64.bin Verify backup\PRELOADER\preloader_sm6757c_64.bin [77a5821a]... Exist Ok Done Elapsed: 00:00:28 Operation : Reset Settings/Format FS [ v2.36 ] Mode: FRP [ RESET PROTECTION ] 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM42) MODE: PRELOADER PORT PORT: 42 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000001 BROM: SecMode : SBC BROM: BROM|BL : 0xFF|0x02 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek USB Port (COM45) MODE: BOOTROM PORT: 45 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B BROM: SecLevel : 0x000000E1 BROM: SecMode : SBC+EXT BROM: BROM|BL : 0x05|0xFE BROM: BOOTROM AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed DA : BOOT to 2nd DA... DA : 2ND stage confirmed DA : SYNC with DA passed DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID: 8F010055593543533010E01A356A8635 EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10 EMMC: VEN: Unknown 0x008F : UY5CS0 EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x750000000 [ 29.25 GB ] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] RNID: E123AFF0C99F0237AD5C89A8347A755D DA: USB : FULL-SPEED DA: USB : Change Port Speed Error: Failed to setup HS_USB port Error : Fail to init protocol >>> Remove battery and cable. Check cable/connection/drivers and repeat operation! Reconnect Power/Cable now Operation : Identify Device [ v2.36 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek DA USB VCOM (Android) (COM43) MODE: PRELOADER PORT PORT: 43 Waiting BOOT ack... PRELOADER : ACK confirm FAIL BROM: Init BROM Error : Fail to init protocol >>> Remove battery and cable. Check cable/connection/drivers and repeat operation! Reconnect Power/Cable now Operation : Identify Device [ v2.36 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek USB Port (COM45) MODE: BOOTROM PORT: 45 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B BROM: SecLevel : 0x000000E1 BROM: SecMode : SBC+EXT BROM: BROM|BL : 0x05|0xFE BROM: BOOTROM AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed DA : BOOT to 2nd DA... DA : 2ND stage confirmed DA : SYNC with DA passed DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID: 8F010055593543533010E01A356A8635 EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10 EMMC: VEN: Unknown 0x008F : UY5CS0 EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x750000000 [ 29.25 GB ] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] RNID: E123AFF0C99F0237AD5C89A8347A755D DA: USB : FULL-SPEED DA: USB : Change Port Speed PTFN: MediaTek DA USB VCOM (Android) (COM43) MODE: PRELOADER PORT PORT: 43 Boot done Verify device config... Ok No loaders to verify STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : NOT Enabled! STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE] Scan preloader... Preloader: EMI: MT6757 preloader_sm6757c_64.bin with 5 memory type(s) supported EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 0 B ] EMI[01] : eMMC : DDR3 : ID: 150100475836424D42 : Ven: Samsung | Dev: GX6BMB : RAM: [ 3.00 GB ] EMI[02] : eMMC : DDR3 : ID: 150100474436424D42 : Ven: Samsung | Dev: GD6BMB : RAM: [ 3.00 GB ] EMI[03] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 3.00 GB ] EMI[04] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 2.00 GB ] Preloader exist: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_sm6757c_64.bin Verify backup\PRELOADER\preloader_sm6757c_64.bin [77a5821a]... Exist Ok Done Elapsed: 00:00:51 Operation : Reset Settings/Format FS [ v2.36 ] Mode: FRP [ RESET PROTECTION ] 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM42) MODE: PRELOADER PORT PORT: 42 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000001 BROM: SecMode : SBC BROM: BROM|BL : 0xFF|0x02 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek USB Port (COM45) MODE: BOOTROM PORT: 45 Waiting BOOT ack... BROM: Skip ACK verify BROM: Init BROM BROM init passed CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B BROM: SecLevel : 0x000000E1 BROM: SecMode : SBC+EXT BROM: BROM|BL : 0x05|0xFE BROM: BOOTROM AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin AGENT : Found MT6757 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed DA : BOOT to 2nd DA... DA : 2ND stage confirmed DA : SYNC with DA passed DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID: 8F010055593543533010E01A356A8635 EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10 EMMC: VEN: Unknown 0x008F : UY5CS0 EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x750000000 [ 29.25 GB ] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551 CODE: Kibo TYPE: MODERN [RAPHAEL] RNID: E123AFF0C99F0237AD5C89A8347A755D DA: USB : FULL-SPEED DA: USB : Change Port Speed PTFN: MediaTek DA USB VCOM (Android) (COM43) MODE: PRELOADER PORT PORT: 43 Boot done Verify device config... Ok No loaders to verify Format Ok: RESET PROTECTION Done Elapsed: 00:00:39 Reconnect Power/Cable now
رد مع اقتباس
.gif)
المفضلات