قائمة الاعضاء المشار اليهم

النتائج 1 إلى 4 من 4

الموضوع: تهيئة (فورمات ) وازالة قفل frp ل IKU x4 SC9863A

  1. #1
    .: مراقب اقسام البوكسات والبرامج المحمية :.
    الصورة الرمزية ProfKefah

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2014
    الدولة
    Islamic world
    المشاركات
    7,936
    الشَكر (المُعطى)
    4288
    الشَكر (المُستلَم)
    8786
    الإعجاب (المُعطى)
    17
    الإعجاب (المُستلَم)
    2330
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1449 مواضيع
    معدل تقييم المستوى
    4822

    افتراضي تهيئة (فورمات ) وازالة قفل frp ل IKU x4 SC9863A

    السلام عليكم


    للاقلاع زري خفض ورفع الصوت




    Ashampoo Snap 27  2022 18h04m0


    Ashampoo Snap 27  2022 18h03m5


    كود:
    Card found : 41DEDF35 , v0153Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
    
    
    Load IDBase v8331 Ok!
    
    
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC7715_BASE : SC7715_eMMC_512MB_NS
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    Kick FDL again ... 
    
    
    >>>  Device not found!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    
    
    >>>  Device not found!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    BootVersion : Spreadtrum Boot Block version 1.1
    Protocol setup ... 
    Port speed : 921600
    Sending Flash Boot ... 
    Boot sent!
    Kick FLASH FDL ... 
    FDL : 0x0008
    FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
    FDL : RAW : 0x0002
    FDL : FLH : 0x400000
    FDL : Control transfered!
    
    
    Boot Done!
    
    
    Device info : 
    Ver. Incmt     : 23415
    Product Brand  : iKU
    Product Device : X4
    Product Model  : X4
    Product Name   : X4
    Patch Level    : RP1A.201005.001
    Display ID     : IKU_X4_V05_20210611
    Ver. Incmt     : 23515
    Ver. CodeName  : REL
    Ver. Release   : 11
    Sec. Patch     : 2021-06-05
    Build Time     : 11.06.2021
    Product Info   : s9863a1c10
    Product Board  : s9863a1c10
    Board Platform : sp9863a
    Product Manfct : Max Tel FZE
    Product Device : s9863a1c10
    Product Name   : s9863a1c10_Natv
    Product Info   : X4
    
    
    
    
    USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )
    
    
     - > INFO : Remove cable from device to switch it off!
    
    
    Done!
    Elapsed: 00:01:21
    
    
    Operation : Read NVM [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    >>>   ERROR : Protocol HandShake failed!
    
    
    >>>  Error : Fail to init protocol!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Read NVM [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    BootVersion : Spreadtrum Boot Block version 1.1
    Protocol setup ... 
    Port speed : 921600
    Sending Flash Boot ... 
    Boot sent!
    Kick FLASH FDL ... 
    FDL : 0x0008
    FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
    FDL : RAW : 0x0002
    FDL : FLH : 0x400000
    FDL : Control transfered!
    
    
    Boot Done!
    
    
    
    
    >>>  Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
    >>>  Make sure you have made "IDENTIFY" first!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    >>>   ERROR : FDL NOT started!
    
    
    >>>  Error : Fail to boot FDL!
    >>>  Unsupported device with selected fdl or settings! Change settings!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    
    
    >>>  Device not found!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Identify [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_3GB_1S
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    BootVersion : Spreadtrum Boot Block version 1.1
    Protocol setup ... 
    Port speed : 921600
    Sending Flash Boot ... 
    Boot sent!
    Kick FLASH FDL ... 
    FDL : 0x0020
    FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
    FDL : RAW : 0x0002
    FDL : FLH : 0x400000
    FDL : Control transfered!
    
    
    Boot Done!
    
    
    Device info : 
    Ver. Incmt     : 23415
    Product Brand  : iKU
    Product Device : X4
    Product Model  : X4
    Product Name   : X4
    Patch Level    : RP1A.201005.001
    Display ID     : IKU_X4_V05_20210611
    Ver. Incmt     : 23515
    Ver. CodeName  : REL
    Ver. Release   : 11
    Sec. Patch     : 2021-06-05
    Build Time     : 11.06.2021
    Product Info   : s9863a1c10
    Product Board  : s9863a1c10
    Board Platform : sp9863a
    Product Manfct : Max Tel FZE
    Product Device : s9863a1c10
    Product Name   : s9863a1c10_Natv
    Product Info   : X4
    
    
    
    
    NVMng  : SecurityInfo 
    
    
    
    
    SEC : SLS:0, SKS:0, SKV:4
    
    
    Platform Version: MOCORTM_20A_W21.07.3_P6_Debug
    Project Version:   sharkl3_pub
    BASE  Version:    4G_MODEM_20A_W21.07.3_P6
    HW Version:        sc9863A_modem
    CMP_Time : 04-16-2021 19:11:46
    
    
    MODEM TAG : MOCORTM_20A_W21.07.3_P6_Debug_4G_MODEM_20A_W21.07.3_P6_sc9863A_modem_sharkl3_pub
    
    
    USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )
    
    
     - > INFO : Remove cable from device to switch it off!
    
    
    Done!
    Elapsed: 00:01:11
    
    
    Operation : Read NVM [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    
    
    >>>  Device not found!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Read NVM [ v2.14 ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_3GB_1S
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    BootVersion : Spreadtrum Boot Block version 1.1
    Protocol setup ... 
    Port speed : 921600
    Sending Flash Boot ... 
    Boot sent!
    Kick FLASH FDL ... 
    FDL : 0x0020
    FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
    FDL : RAW : 0x0002
    FDL : FLH : 0x400000
    FDL : Control transfered!
    
    
    Boot Done!
    
    
    NVMng  : SecurityInfo 
    
    
    SEC : SLS:0, SKS:0, SKV:4
    
    
    NVMng  : Backup Ok , 0x000E29D4
    
    
    NVMng  : Saved as : 356338890070505__l_fixnv1_a.nvm
    NVMng  : Saved to : C:\InfinityBox\CM2SP2\Backup\\
    
    
    Platform Version: MOCORTM_20A_W21.07.3_P6_Debug
    Project Version:   sharkl3_pub
    BASE  Version:    4G_MODEM_20A_W21.07.3_P6
    HW Version:        sc9863A_modem
    CMP_Time : 04-16-2021 19:11:46
    
    
    MODEM TAG : MOCORTM_20A_W21.07.3_P6_Debug_4G_MODEM_20A_W21.07.3_P6_sc9863A_modem_sharkl3_pub
    
    
    Reconnect Power/Cable!
    
    
    Done!
    Elapsed: 00:00:26
    
    
    Operation : Format FS / Reset Settings [ v2.14 ]
    Mode : Default [ Reset Settings + FRP ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    
    
    >>>  Device not found!
    >>>  Remove battery, cable. Check cable and connection. Repeat operation!
    
    
    Reconnect Power/Cable!
    
    
    Operation : Format FS / Reset Settings [ v2.14 ]
    Mode : Default [ Reset Settings + FRP ]
    BootMode : FLASH
    
    
    1. Power off device, wait 10-15 seconds
    2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
    3. Insert cable in device!
    
    
    Wait for device ... 
    
    
    Device Connected!
    BootVersion : SPRD3
    Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_3GB_1S
    Sending Init Boot ... 
    Boot sent!
    Kick FDL ... 
    BootVersion : Spreadtrum Boot Block version 1.1
    Protocol setup ... 
    Port speed : 921600
    Sending Flash Boot ... 
    Boot sent!
    Kick FLASH FDL ... 
    FDL : 0x0020
    FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
    FDL : RAW : 0x0002
    FDL : FLH : 0x400000
    FDL : Control transfered!
    
    
    Boot Done!
    
    
    Wipe Ok : UserData
    Wipe Ok : Cache
    Wipe Ok : FRP
    
    
    Reconnect Power/Cable!
    
    
    Done!
    Elapsed: 00:00:16


    اعتذاري واسفي الشديد عن نشر الادوات فك القفل المجانيه لذا تم الحذف من القناة

  2. الإعجاب hamada yousri مُعجَبون
  3. #2
    ..:: Super Moderator ::.
    اسم المحل
    ALMOGTABA MALL
    الصورة الرمزية SALIHMOB

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2008
    الدولة
    Sudan
    Sonork
    100.1596596
    Phone
    IPHONE
    المشاركات
    15,161
    الشَكر (المُعطى)
    22982
    الشَكر (المُستلَم)
    30335
    الإعجاب (المُعطى)
    619
    الإعجاب (المُستلَم)
    379
    غير معجبون (المُعطى)
    5
    غير معجبون (المُستلَم)
    1
    تم تذكيره فى
    3 مشاركة
    تمت الاشارة اليه فى
    1726 مواضيع
    معدل تقييم المستوى
    2305

    افتراضي

    مشكور علي عرض التجربة
    ليست مشكلــتي إن لم يفــهم البعض ما أعنـيه
    فهذه قنـاعاتي .. وهذه أفكـاري .. وهـذه كتاباتي بين يديكم
    أكتب ما اشعـر به .. وأقول ما أنا مـؤمن به .. أنقـل همـوم غيري بطرح مختلف
    ليس بالضـرورة ما أكتبه يعكـس حياتي الشخصية
    هي في النـهاية .. مجـرد رؤى لأفكـاري
    مـع كل الحـب والتـقدير لمن يمـتلك وعيـاً كـافياً
    يجبر قلـمي على أن يحترمــه



  4. #3
    .: مراقب أقسام البوكسات والبرامج المحمية :.
    الصورة الرمزية hamada yousri

    الحالة
    غير متواجد
    تاريخ التسجيل
    Dec 2008
    الدولة
    مصر / المنصورة
    العمر
    44
    Phone
    Realme 7 pro
    المشاركات
    11,472
    الشَكر (المُعطى)
    7762
    الشَكر (المُستلَم)
    13169
    الإعجاب (المُعطى)
    11450
    الإعجاب (المُستلَم)
    1606
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1753 مواضيع
    معدل تقييم المستوى
    4662

    افتراضي

    عاش حبيبى كفاح
    GEM-FLASH.com First Arabic Support For All Arabic Mobiles FLASH Files
    سبورت الجيم فلاش Home Page | GEM-FLASH Firmware
    منتدي الجيم فلاش منتدى الجيم فلاش
    متجر الجيم فلاش GEM-FLASH Store ظ…طھط¬ط± ط§ظ„ط¬ظٹظ… ظپظ„ط§ط´
    سيرفر الجيم فلاش GEM-FLASH Server
    مركز رفع الصور Welcome to GEM-FLASH.COM Multi Uploader, a free image upload solution. Simply browse, select, and upload!

  5. #4
    .:مشرف بقسم السوفت الصينى:.
    اسم المحل
    صيانة لمحمول
    الصورة الرمزية Abo Amir

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2009
    الدولة
    سورية الحبيبة
    Phone
    g532f
    المشاركات
    11,410
    الشَكر (المُعطى)
    17983
    الشَكر (المُستلَم)
    10055
    الإعجاب (المُعطى)
    181
    الإعجاب (المُستلَم)
    2007
    غير معجبون (المُعطى)
    1
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    2293 مواضيع
    معدل تقييم المستوى
    11394

    افتراضي

    الله ينور عليك
    • سبحان الله العظيم وبحمده
    • حسبنا الله ونعم الوكيل
    • استغفر الله العظيم الذي لا اله الا هو الحي القيوم واتوب اليك
    • لا اله الا انت سبحانك اني كنت من الظالمين

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •