Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DFCA914BC5CD
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DFCA914B
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG4a2_28_02_2022_23_34_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.3.1; FW: 1.24.
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/OPPO_A3S_EMMC.SRF".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switch error!!!
Writing GPT partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Switched to user area.
Writing oppodycnvbk partition... Done.
Writing oppostanvbk partition... Done.
Writing persist partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing opporeserve1 partition... Done.
Writing opporeserve2 partition... Done.
Writing reserve_exp1 partition... Done.
Writing reserve_exp2 partition... Done.
Writing fsc partition... Done.
Writing ssd partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing sbl1 partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing devcfg partition... Done.
Writing sbl1bak partition... Done.
Writing rpmbak partition... Done.
Writing tzbak partition... Done.
Writing devcfgbak partition... Done.
Writing dsp partition... Done.
Writing DDR partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing sec partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing aboot partition... Done.
Writing abootbak partition... Done.
Writing modem partition... Done.
Writing dtbo partition... Done.
Writing vbmeta partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing devinfo partition... Done.
Writing splash partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing LOGO partition... Done.
Writing DRIVER partition... Done.
Writing misc partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing keystore partition... Done.
Writing config partition... Done.
Writing oem partition... Done.
Writing limits partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing mota partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing dip partition... Done.
Writing mdtp partition... Done.
Writing syscfg partition... Done.
Writing mcfg partition... Done.
Writing lksecapp partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing cmnlib partition... Done.
Writing cmnlib64 partition... Done.
Writing keymaster partition... Done.
Writing lksecappbak partition... Done.
Writing cmnlibbak partition... Done.
Writing cmnlib64bak partition... Done.
Writing keymasterbak partition... Done.
Writing apdp partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing msadp partition... Done.
Writing dpo partition... Done.
Writing logdump partition... Done.
Writing vm-kystore partition... Done.
Writing vm-data partition... Done.
Writing hyp partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Writing vm-system partition... Done.
Writing vm-linux partition... Done.
Smart Repair is successfully complete.
SW: 2.2.3.1; FW: 1.24.
Disconnected.
srf file oppo a3s cph1803
gsm4sirt شَكر
المشاركة الأصلية كتبت بواسطة allttar
gsm4sirt مُعجَبون
رد مع اقتباس
المفضلات