هل يوجد حل

[alharb]

peration : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: ?MediaTek USB Port_V1632 (COM3)?
Path: \\?\usb#vid_0e8d&pid_0003#6&17706c76&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k65v1_64_bsp_211220_102437.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : )
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Failed! Please retry or update drivers!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

[MouAeD1989]

ما موديل الجهاز ومشكلته

[alharb]

شاومي 9c كل الاجهزة ما بقراء عندي

[hamada yousri]

شاومي 9c كل الاجهزة ما بقراء عندي

ثبت تعريف دا وردلى خبر من هنااااا

[alharb]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3 [?USB Serial Device (COM3)?]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&17706c76&0&2#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 98C915B5ABCD48230AF36555032ED701
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_211221_103704.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : )
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Failed! Please retry or update drivers!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.8]
نفس المشكلة يا باشا

[hamada yousri]

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3 [?USB Serial Device (COM3)?]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&17706c76&0&2#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 98C915B5ABCD48230AF36555032ED701
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_211221_103704.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : )
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Failed! Please retry or update drivers!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.8]
نفس المشكلة يا باشا

صورة من تعريفات ديافيس مانجر وانت موصل الجهاز على البوكس اثناء العملية

[alharb]

على فكرة عند صديقي اشتغل تمام ونفس نسخة الوندوز بس الابتوب ال عندو احدث من ال عندي ممكن يكون سبب

[alharb]

للعلم على دنجل eft يعمل انفو لجميع اجهزة mtk

[alharb]

الحمد الله تم حل المشكلة بستخدام ندوز 10 انجليزي شكرا لكم

[hamada yousri]

مبروك الحل يا احمد الحمد لله
أحمد كان شغال ويندوز 10 لغة عربى يا شباب وبعد تغيير لغة الويندوز الى انجليزى تم حل المشكلة بفضل الله وتوفيقة