قائمة الاعضاء المشار اليهم

النتائج 1 إلى 2 من 2

الموضوع: بنجاح آصلاح البوة لG318H

  1. #1
    .: جيماوي محترف :.
    الصورة الرمزية allttar

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    المشاركات
    2,322
    الشَكر (المُعطى)
    598
    الشَكر (المُستلَم)
    1024
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    121
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    199

    افتراضي بنجاح آصلاح البوة لG318H

    الجهاز ميت بعد خطآ في التفليش
    آختيار G318HDS

    Welcome to Medusa Pro Software version 2.2.2

    .


    Started.
    Reader #0: Generic EMV Smartcard Reader 1


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x08) 00001000
    Boot partition enable : Boot partition 1
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_46_29.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...
    Not found
    ---------------------------------------------------------------
    Erasing. Please wait... Done.
    SW: 2.2.2; FW: 1.24.
    Disconnected.


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-G318HDS
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x08) 00001000
    Boot partition enable : Boot partition 1
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_46_53.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...
    Not found
    ---------------------------------------------------------------
    Erasing. Please wait... Done.
    SW: 2.2.2; FW: 1.24.
    Factory Format will erase all eMMC data!
    Do you want to continue? Yes.
    Formating...Done.
    SW: 2.2.2; FW: 1.24.
    Disconnected.


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-G318HDS
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x00) 00000000
    Boot partition enable : Device not boot enabled (default)
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x0
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_47_52.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...
    Not found
    ---------------------------------------------------------------
    No General Purpose Partition 1
    enhanced attribute is not set
    write reliablity is set


    No General Purpose Partition 2
    enhanced attribute is not set
    write reliablity is set


    No General Purpose Partition 3
    enhanced attribute is not set
    write reliablity is set


    No General Purpose Partition 4
    enhanced attribute is not set
    write reliablity is set


    No enhanced user data area
    write reliablity is set


    Creating HW partitions succesfully complete!
    Disconnected.


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-G318HDS
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x00) 00000000
    Boot partition enable : Device not boot enabled (default)
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x1
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_48_04.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...
    Not found
    ---------------------------------------------------------------
    Writing EXT_CSD succesfully complete!
    Disconnected.


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-G318HDS
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x08) 00001000
    Boot partition enable : Boot partition 1
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x1
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_48_59.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...
    Not found
    ---------------------------------------------------------------
    Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf".
    Write data verification is enabled.


    Switched to boot area partition 1.
    Writing BOOT1 partition... Done.


    Switched to user area.
    Writing GPT partition... Done.
    Writing SBOOT partition... Done.
    Writing SBOOT2 partition... Done.
    Writing wfixnv1 partition... Done.
    Writing wfixnv2 partition... Done.
    Writing tdfixnv1 partition... Done.
    Writing tdfixnv2 partition... Done.
    Writing WDSP partition... Done.
    Writing MODEM partition... Done.
    Writing MODEM2 partition... Done.
    Writing TDDSP partition... Done.
    Writing FOTA_SIG partition... Done.
    Writing wruntimenv1 partition... Done.
    Writing wruntimenv2 partition... Done.
    Writing tdruntimenv1 partition... Done.
    Writing tdruntimenv2 partition... Done.
    Writing PARAM partition... Done.
    Writing efs partition... Done.
    Writing prodnv partition... Done.
    Writing RESERVED2 partition... Done.
    Writing KERNEL partition... Done.
    Writing RECOVERY partition... Done.
    Writing PERSDATA partition... Done.


    Smart Repair is successfully complete.
    SW: 2.2.2; FW: 1.24.
    Disconnected.


    Please disconnect battery and USB cable.


    Model Settings:
    Interface : eMMC
    Brand : Samsung
    Model : SM-G318HDS
    SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G318HDS_EMMC.srf
    Voltage : 1.8V
    Bus Mode : 1 bit
    Bus speed : Auto


    Connecting...
    Device : Hynix eMMC H4G2b
    Page size : 512 B
    Block size : 512 B
    Block count : 7634944
    Size : 3728.00 MB
    ---------------------------------------------------------------
    CID Info


    CID : 90014A4834473262110126EB04F492AF
    Manufacturer ID : 0X90
    Device/BGA : BGA (Discrete embedded)
    OEM/Application ID : 0X4A
    Product name : H4G2b
    Product revision : 0.1
    Product serial number : (hex) 26EB04F4
    Manufacturing date : 09/2015
    ---------------------------------------------------------------
    CSD Info


    CSD : D07F01320F5903FFFFFFFFEF8A4040DB
    CSD structure : CSD version No. 1.2
    SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
    4.51, 5.0, 5.01, 5.1
    Data read access time1: 80 ms
    TRAN speed : 26 MHz
    READ block length : 512 Bytes
    WP group enable : YES
    PERM_WRITE_PROTECT : NO
    TMP_WRITE_PROTECT : NO
    ---------------------------------------------------------------
    EXTCSD Info


    Revision 1.6 (for MMC v4.5, v4.51)
    Erase block size : 512 Kbytes
    Boot1 size : 4096 Kbytes
    Boot2 size : 4096 Kbytes
    RPMB size : 4096 Kbytes


    Partition config : (0x08) 00001000
    Boot partition enable : Boot partition 1
    (Bus width = 1Bit)
    Boot ACK : No boot acknowledge sent (default)


    Boot bus conditions : (0x00) 00000000
    Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode : Use single data rate + backward compatible timings in boot operation (default)


    RST_n function : (0x00) RST_n signal is temporary disabled (default)


    Partitioning support : Device supports partitioning features
    Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 1908736 Kbytes
    Partitions attribute : 0x0
    Part setting completed: 0x1
    GP partition 1 size : 0 b
    GP partition 2 size : 0 b
    GP partition 3 size : 0 b
    GP partition 4 size : 0 b
    Enhanced area size : (0x0) 0 b
    Enhanced area start : (0x0) 0 b


    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_12_09_2021_17_51_55.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.2.2; FW: 1.24.
    P00: GPT (00000000, 00002000) 4 MB
    P01: SBOOT (00002000, 00001000) 2048 KB
    P02: SBOOT2 (00003000, 00001000) 2048 KB
    P03: wfixnv1 (00004000, 00000800) 1024 KB
    P04: wfixnv2 (00004800, 00000800) 1024 KB
    P05: tdfixnv1 (00005000, 00000800) 1024 KB
    P06: tdfixnv2 (00005800, 00000800) 1024 KB
    P07: WDSP (00006000, 00002000) 4 MB
    P08: MODEM (00008000, 00004000) 8 MB
    P09: MODEM2 (0000C000, 00004000) 8 MB
    P10: TDDSP (00010000, 00002000) 4 MB
    P11: FOTA_SIG (00012000, 00000800) 1024 KB
    P12: wruntimenv1 (00012800, 00000800) 1024 KB
    P13: wruntimenv2 (00013000, 00000800) 1024 KB
    P14: tdruntimenv1 (00013800, 00000800) 1024 KB
    P15: tdruntimenv2 (00014000, 00000800) 1024 KB
    P16: PARAM (00014800, 00001000) 2048 KB
    P17: efs (00015800, 0000A000) 20 MB
    P18: prodnv (0001F800, 00002800) 5 MB
    P19: RESERVED2 (00022000, 00000800) 1024 KB
    P20: KERNEL (00022800, 00008000) 16 MB
    P21: RECOVERY (0002A800, 00008000) 16 MB
    P22: PERSDATA (00032800, 00004800) 9 MB
    P23: CSC (00037000, 00064000) 200 MB
    P24: system (0009B000, 00203000) 1030 MB
    P25: HIDDEN (0029E000, 0001D000) 58 MB
    P26: userdata (002BB000, 00486000) 2316 MB
    Backuping efs partition...
    Opening C:/Program Files/Medusa Pro Software/Backups/H4G2b_efs_0x15800_0xa000_12_09_2021_17_51_55.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:30
    SW: 2.2.2; FW: 1.24.


    ---------------------------------------------------------------
    Searching Android build info...





  2. #2
    .: جيماوي محترف :.
    الصورة الرمزية احمدالقلعاوي2

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2013
    الدولة
    العراق
    Phone
    iphone 6 s
    المشاركات
    4,355
    الشَكر (المُعطى)
    2108
    الشَكر (المُستلَم)
    1802
    الإعجاب (المُعطى)
    1623
    الإعجاب (المُستلَم)
    412
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    576 مواضيع
    معدل تقييم المستوى
    301

    افتراضي

    عاشت الايادي تسلم ايدك يابطل
    خير الناس من نفع الناس

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •