السلام عليكم



نفس المواضيع هنا
ازالة قفل FRP لهاتف Huawei Y5 (2019) AMN-LX9 بالتيست بوينت 9.1.0.356

ازالة قفل FRP لهاتف Huawei Y5 (2019) AMN-LX9 بالتيست بوينت

الحماية تختلف



Welcome to Octoplus Huawei Software v.‪1.2.5‬








To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode


To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode


To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'


Found COM ports:
1: COM5 USB Serial Port
2: COM1 Communications Port
2021-04-18 17:34:34 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪AMN-LX9‬
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ‪MediaTek USB Port_V1632‬ port


Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Initializing remote service connection...
Downloading Authentication Data...
Sending Authentication Data...
Initializing remote service connection...
Downloading Download Agent data...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing remote service connection...
Downloading preloader data...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
Reading Partition Table
Reading FRP Partition
Removing FRP secure data...


Reset FRP (Factory Mode) done.
Performed by ‪1.2.5‬ Software version.