.: مراقب اقسام البوكسات والبرامج المحمية :.
الحالة
غير متواجد
ازالة قفل frp لهاتف Huawei Y5 (2019) AMN-LX9 الحمايه 9.1.0.369
السلام عليكم
نفس المواضيع هنا
ازالة قفل FRP لهاتف Huawei Y5 (2019) AMN-LX9 بالتيست بوينت 9.1.0.356
ازالة قفل FRP لهاتف Huawei Y5 (2019) AMN-LX9 بالتيست بوينت
الحماية تختلف
Welcome to Octoplus Huawei Software v.1.2.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 USB Serial Port
2: COM1 Communications Port
2021-04-18 17:34:34 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: AMN-LX9
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected MediaTek USB Port_V1632 port
Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Initializing remote service connection...
Downloading Authentication Data...
Sending Authentication Data...
Initializing remote service connection...
Downloading Download Agent data...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing remote service connection...
Downloading preloader data...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
Reading Partition Table
Reading FRP Partition
Removing FRP secure data...
Reset FRP (Factory Mode) done.
Performed by 1.2.5 Software version.
اعتذاري واسفي الشديد عن نشر الادوات فك القفل المجانيه لذا تم الحذف من القناة
المفضلات