Unlock in infinity

[GSMSALIK]

فتح هاتف ZTE X761

COM4 [VCP0] selected
module v2.83
Action: unlock
unlock method: smart fast
Model: ZTE-X761
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6103:0007
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: X761_Z2_SF_BFFA103
Version: ZTEMT25_07A_HW_C
44 byte(s) read
imei: 35787302126588
connection Ok
157 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done

[GSMSALIK]

ريزت كود هاتف لي الكاتيل S218

module v2.83
Action: read codes
Model: Alcatel-S218X
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:0428:A00C
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: MAUI.07A.W07.36.SP1.V20
Version: JRD23_07A_HW
44 byte(s) read
imei: 35234802034753
connection Ok
156 byte(s) read
Phone lock: On
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 123456
Finished, time used: 23 sec

[GSMSALIK]

فتح هاتف فرجن سليد

Boot ...

Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8A01]...
CPU: MT6219
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
ffs address can not be detected, value from database assigned: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: 01227E22212200:29EA0000000000
Backup required data Done
Patch required data ...
..............................................
lock area found
Patch required data Done
Special operation ...
detecting parameters to apply patch area 0/...
................................................
flash: 01227E22212200:29EA0000000000
flash: 01227E22212200:29EA0000000000
Write: area 0/1
................
area 0/ patch applied Ok
Special operation Done
Write ...
flash: 01227E22212200:29EA0000000000
flash: 01227E22212200:29EA0000000000
Write: lock-area-1
Write Done
Finalization ...
Finalization Done
Finished, time used: 78 sec

[GSMSALIK]

فتح الكاتيل

COM4 [VCP0] selected

module v2.82
Device: Alcatel-S320X
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
S320X-2AKPNL1_XH16BM13_JRD23_07A_PCB01_GPRS_MT6223_S00[1].MAUI_07A_W07_36_SP1_V20_2008-06-26_En_Fr_Tr_Ar_simfree.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:1957:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done

[GSMSALIK]

فتح الكاتيل

COM4 [VCP0] selected
module v2.82
Device: Alcatel-303X, 303A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
303X-2BALCY1-169_XI16GS02_JRD23_08A_PCB01_GPRS_MT6223P_S00[1].MAUI_08A_W08_36_SP1_V9_2009-05-14_En_Ru_Gr_Bg_Al_simfree.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:A12B:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.2E5FCDF1.[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V9.BIN_62AAFDFA].rpl
identification#1 detection finished
device-id: 2E5FCDF1
identification#1 protocol ver: 05
ver. sw 1: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V9.BIN
ver. sw 2: MAUI.08A.W08.36.SP1.V9, 0502559D
ffs offset/size: 00C00000/00400000
ffs address assigned: 00C00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
security area (code #1) check...
security area (code #1) calculation...
security area (code #1) fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-303X,303A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V9__system_log_2E5FCDF1_62AAFDFA_20090719-170021.B0X.bin
Area: Firmware
flash: 98004900000002:2BEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CI16GS02
done
flash: 98004900000002:2BEA0000000000
flash: 98004900000002:2BEA0000000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
..................security area (code #3, part #1) detecting size...
security area (code #3, part #1) detecting parameters...
security area (code #3, part #1) encoding...
done
flash: 98004900000002:2BEA0000000000
flash: 98004900000002:2BEA0000000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-303X,303A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_SP1_V9__system_log_2E5FCDF1_62AAFDFA_20090719-170445.B0X.bin
Finished, time used: 298 sec
Remove/Install battery now !

[GSMSALIK]

== log opened: [22/06/2009 12:05:32]

Application: D:\Program Files\InfinityBox\VkMobile02\VkMob02.exe
Loading data, wait...
[Infinity Box] v1.10
S/N: 0722:0112
Device: VK4000
Ready
COM63 ready
Action: reset settings
Model: VK4000
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Region: UK Virgin
Hardware version: J°i
Software version: VK4000_DZ0.90R
battery parameter: 344
Imei: 358503000763889
Finished, time used: 11 sec
Remove/Install battery now !

[GSMSALIK]

==== log: [05/08/2009 21:21:44] ====
COM6 [VCP0] selected
module v1.35
Device: Sony-Ericsson-K200i
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 01227E22212200:92EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
software version: R1AA008
software version: CXC1250827
version flex: CDA102773/8
imei: 35617701218934
Check hardware done
Read data ...
reading Sony-Ericsson-K200i_35617701218934_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\Sony-Ericsson-K200i_35617701218934_eeprom_calibration-1_20090805-212209.80E.bin
reading Sony-Ericsson-K200i_35617701218934_eeprom_calibration-2...
file saved: D:\Program Files\InfinityBox\HModule\Sony-Ericsson-K200i_35617701218934_eeprom_calibration-2_20090805-212222.80E.bin
Read data done
Check data ...
Check data done
Write ...
flash: 01227E22212200:46237300000000
Write: eeprom
flash: 01227E22212200:46237300000000
Write: eeprom
......
.........
locks cleared
Write done
Finished, time used: 50 sec
Remove/Install battery now !

[GSMSALIK]

Device: Sony-Ericsson-J132
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: 2088C0FFFFFFFF:2088C000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
Check hardware done
Read data ...
reading Sony-Ericsson-J132_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\Sony-Ericsson-J132_eeprom_calibration-1_20090802-135242.80E.bin
Read data done
Check data ...
Check data done
Write ...
.....
flash: 2088C0FFFFFFFF:2088C000000000
Write: simlock
Write done
Finished, time used: 75 sec
Remove/Install battery now !

[GSMSALIK]

Device: Sony-Ericsson-R306
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
115200
Set baud done
Check hardware ...
flash: EC3002FFFFFFFF:EC300200000000
flash: Samsung ST [def 0080x040000] 32Mb
Check hardware done
Read data ...
reading Sony-Ericsson-R306_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\Sony-Ericsson-R306_eeprom_calibration-1_20090730-183219.80E.bin
Read data done
Check data ...
Check data done
Write ...
..............
flash: EC3002FFFFFFFF:EC300200000000
Write: simlock
Write done
Finished, time used: 192 sec
Remove/Install battery now !

[GSMSALIK]

Device: ZTE-125
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
sw version: TEL-P108A11V1.0.0B03 CELTEL-P108A11B01-EnFr-01 g3dBV2.0 04.12.00
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: D:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-static_20090809-171651.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: D:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-security_20090809-171651.B1E.bin
reading eeprom-complete...
file saved: D:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-complete_20090809-171652.B1E.bin
reading additional data...
file saved: D:\Program Files\InfinityBox\Pana01\ZTE-125_lock-area_20090809-171657.B1E.bin
backup critical area Done
Check memory ...
lock found
lock type #1 found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 25 sec
Remove/Install battery now !