بعد فقدان اللغة بسبب فورمات
تفليش بنجاح وآرجاع جميع اللغات
SPRD mode : SC6531 : REV : C000 : NOR : [ 4MB-8MB ]

BINARY : SPRD_SPI_FIDELIX_FM25Q_8MiB.bin
FLSIZE : 0x00800000
Platform Version: MOCOR_12C.W13.04.14_Debug
G2425_it5081_64X64_240X320BAR_EnBn_BD
Project Version: it5081-G2425-EnBn-BD-20190312
MMI Version: it5081-G2425-EnBn-BD-20190312
BASE Version: BASE_SVN
HW Version: fp6531_bar
03-12-2019 19:36:31
LOG Version: V1.0.1
Load Ok!

Operation : Write Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

BIN : Format UserData
BIN : Format UserData Ok!

Done!
Elapsed: 00:01:58

Reconnect Power/Cable!

Error : Load file error! Neither PAC or BINARY file!
SCR module support BIN and PAC files as FlashFile! Select correct file!

Error : Load file error! Neither PAC or BINARY file!
SCR module support BIN and PAC files as FlashFile! Select correct file!

Error : Load file error! Neither PAC or BINARY file!
SCR module support BIN and PAC files as FlashFile! Select correct file!

BINARY : itel 5081 SPRD_SPI_FIDELIX_FM25Q_8MiB.bin
FLSIZE : 0x00800000
Platform Version: MOCOR_12C.W13.04.14_Debug
G2425_it5081_64X64_240X320BAR_EnFrPoArSwHa
Project Version: it5081-G2425-EnFrPoArSwHa-20190313
MMI Version: it5081-G2425-EnFrPoArSwHa-20190313
BASE Version: BASE_SVN
HW Version: fp6531_bar
03-13-2019 19:31:41
LOG Version: V1.0.1
Load Ok!

Operation : Write Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Write Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Write Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Write Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

BIN : Format UserData
BIN : Format UserData Ok!

Done!
Elapsed: 00:02:01