قائمة الاعضاء المشار اليهم

النتائج 1 إلى 6 من 6

الموضوع: HWK Upgrade Client FAQ by Odia

  1. #1
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    المشاركات
    714
    الشَكر (المُعطى)
    2832
    الشَكر (المُستلَم)
    473
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي HWK Upgrade Client FAQ by Odia

    General notes:

    - Itv is better not to use Win98 to upgrade HWK module. Please use Win2k/XP only because Upgrade client was developed for these OS'es
    - Old UFS and HWK software versions will not work after HWK module, new software versions will also not work with not updated HWK module
    - Please disable all antivirus and firewall softwares before upgrade
    - Before running upgrade client it is recommended to set screen resolution to not less than 1024x768 and font size to Normal
    - NEVER publish your UFS and HWK serial numbers on forum
    - Please pay attention to the message, that is shown by software at the end of upgrade procedure. If it is - "Update successful, use Client again to authorize HWK", you should run upgrade client again to authorize your HWK module (actually - repeat operation).


    Error messages:

    1. HWK SD REPAIR ERROR: xxxxx
    HWK upgrade error. This error occures when HWK was affected by third-party tools before upgrade or your HWK is a clone. Please don't contact anyone, it's your own stupid fault.


    2. Your account is suspended. Please contact your reseller!
    Your account is blocked by administrator. Please contact your reseller
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    3. No more upgrade logs.
    HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you haven't tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    4. Server is going to shutdown. Please try update in 20 minutes.
    Server is being stopped by administrator. Please try upgrade process again in 20 mins.


    5. Account for this HWK module does not exist on server. Please contact your reseller!
    Account for HWK number with this serial does not exist on server. Please contact your reseller.
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    6. Authorization failed! Are you using the latest HWK Upgrade client software version?
    Server authorization error. Please ensure you are using the latest UFS suite and upgrade client software versions


    7. Your account was closed by the server administrator. Please contact your reseller!
    Your account on server was closed by administrator. Please contact your reseller
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again.
    Download new upgrade client from support area and try upgrading your HWK module with it.


    9. Error upgrading applets: HWK UPDATE ERROR: xxxxxx
    Hardware problem occured during upgrade process. Please contact your reseller.
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    10. Error connecting to ufs: hwk login error: xxxx
    Error establishing data transmission channel with HWK module. Please ensure your module is present and is correctly installed. If you are unable to solve the problem by yourself - please contact your reseller
    You need to provide your reseller at least the following information:
    - The date and invoice number of your HWK purchase
    - Full log given to you by upgrade client


    11. Authentication stage error: Server reported error:Not translated!
    Please select English language om the software's welcome page and retry upgrade process. Now error message will be shown correctly


    12. Connection to server failed: Socket Error # 10060
    Connection to server failed: Socket Error # 10061
    Connection refused.
    Please disable or uninstall all installed antivirus and firewall software and retry upgrade operation. If the error persists, please ensure, that your internet provider is not using firewall also


    13. Authentication stage error: Socket Error # 10053
    Software caused connection abort.
    General TCP/IP failture occured. Please disconnect from internet (having your modem switched off for example), wait for 5-7 minutes and connect to internet again and retry upgrade process.


    14. Authentication stage error: Socket Error # 10054
    Connection reset by peer.
    TCP/IP connection to server from your PC is unstable. Please try to connect to internet via different internet provider. If you have no such possibility, please try to perform upgrade process several times until you get positive result.


    15. Connection Closed Gracefully.
    Connection to server was suddenly terminated. Please retry upgrade process a bit later or try to connect to the internet via another internet provider and retry the upgrade.


    16. Authentication stage error: Error: Server returned unrecognized reply.
    You are using an old version of the update client, please install the latest HWK Suite and use the update client from that version.

    P.S.

    - Please do not ask stupid questions in this thread. If it is said "contact your reseller" - really contact him first before posting anywhere
    - to "sweet free soft lovers" and cloned HWK module owners: I cannot activate anything, add anybody to anywhere, restore your HWK module or transmute water to wine. I am tired already of messages with questions about cloned modules restoration





  2. #2
    .: جيماوي رائع :.
    الصورة الرمزية Ahmed Fone

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    المشاركات
    780
    الشَكر (المُعطى)
    841
    الشَكر (المُستلَم)
    620
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    27

    افتراضي

    يا عم المنتدي عربي عربي عربي
    اللهم اجعلنا نأمن فى بلدنا بالاستقرار
    ووفقنا فى الاختيار


  3. #3
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    المشاركات
    714
    الشَكر (المُعطى)
    2832
    الشَكر (المُستلَم)
    473
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    طيب انا جبت لحضرتك واجهه تعريب الترناودو
    ممكن تفيدك

  4. #4
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    المشاركات
    714
    الشَكر (المُعطى)
    2832
    الشَكر (المُستلَم)
    473
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    اقتباس المشاركة الأصلية كتبت بواسطة Ahmed Fone مشاهدة المشاركة
    يا عم المنتدي عربي عربي عربي

    ممكن تفيدك

  5. #5
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    المشاركات
    195
    الشَكر (المُعطى)
    3
    الشَكر (المُستلَم)
    42
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    20

    افتراضي

    السلام عليكم
    انا اواجه هذا المشكل ارجو الحل علىالخاص
    uthentication stage error: Socket Error # 10054

  6. #6
    VIP Member
    الصورة الرمزية جزائري

    الحالة
    غير متواجد
    تاريخ التسجيل
    Mar 2008
    الدولة
    سورى حتى يرحل الكلب او يموت
    Phone
    D900I
    المشاركات
    6,704
    الشَكر (المُعطى)
    10729
    الشَكر (المُستلَم)
    16249
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    2
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    3 مواضيع
    معدل تقييم المستوى
    422

    افتراضي

    اقتباس المشاركة الأصلية كتبت بواسطة مكي محمد مشاهدة المشاركة
    السلام عليكم
    انا اواجه هذا المشكل ارجو الحل علىالخاص
    uthentication stage error: Socket error # 10054
    اذا كانت يضهر لك هذا الخطأ عند تحديث hwk فالمشكلة عندك اخي من مزود الخدمة لأن tcp/ip عندك متغير حاول التحديث من مكان اخر
    مع انك لم تخبرنا على اي اصدار تعمل
    معك للمتابعة
    يا رب احمي سوريا

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •