قائمة الاعضاء المشار اليهم

صفحة 1 من 2 12 الأخيرةالأخيرة
النتائج 1 إلى 10 من 18

الموضوع: جميع تحديثات Cyclone Box في موضوع واحد ومتجدد (v01.76)

  1. #1
    Product Supporter
    الصورة الرمزية Fast Unlocker

    الحالة
    غير متواجد
    تاريخ التسجيل
    Feb 2008
    الدولة
    Furious Team
    المشاركات
    3,045
    الشَكر (المُعطى)
    875
    الشَكر (المُستلَم)
    4568
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    3 مواضيع
    معدل تقييم المستوى
    84

    Smile جميع تحديثات Cyclone Box في موضوع واحد ومتجدد (v01.76)

    الموضوع مخصص للتحديثات

    ساقوم بوضعها جميها هنا

    ارجو الالتزام من الجميع



    GPG Team

    Furious team


  2. تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many

  3. #2
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Mar 2009
    المشاركات
    55
    الشَكر (المُعطى)
    113
    الشَكر (المُستلَم)
    20
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي تحديث جديد لبوكس السيكلون

    New Bulk Update for Cyclone Box is ready, this includes:

    1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

    - BB5 Booting for 5800,N97,5220 and others fixed
    - Fixed problem when box has been hanging up during BB5 boot
    procedure.
    - Meaning of "Repower on boot" button has been inverted. That means,
    BB5 phones are now by default repowered during boot (more stability
    while dealing with dead / stucked / unbootable phones).
    - Fixed box stability during 1208 flash and CP extract, no more
    "Failed to set Flashbus baud"
    - General Improved FBUS Stack stability
    - Code revised
    - Small speed improvment during BB5 TX2 Flashing
    - Minor changes/bugfixes

    2. Support for new DCT4Plus phones unlock/relock/autolock:

    RM-305 1650 v5.91
    RH-105 1208 v5.91
    RH-105 1209 v5.91
    RM-298 2630 v7.60
    RM-299 2630b v7.60
    RM-258 2760 v7.60
    RM-258 2760b v7.60
    RH-64 1600 v6.46
    RH-92 1100ib v6.46
    RH-93 1100i v6.46
    RM-291 v06.81 (missing partial)

    5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

    6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

    7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

    8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

    RM-392 2680 v6.17
    RM-393 2680b v6.17
    RM-392 2680 v5.28
    RM-393 2680 v5.28
    RM-362 5000d v6.31
    RM-363 5000db v6.31

    Download bulkupdater from : http://rapidshare.com/files/26579434...te10082009.exe
    Size - 15MBytes
    (trafficshare download, you don't need have rapidshare account to download updater).
    Run it and click INSTALL, all patches will be applied automaticlly.

    Best Regards,
    CT,
    Stay tuned

  4. الشَكر driss , mohamed73, june29 شَكر
  5. #3
    صديق المنتدى
    الصورة الرمزية DARIFBS

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    المملكة المغربية
    Phone
    Nokia
    المشاركات
    1,796
    الشَكر (المُعطى)
    1282
    الشَكر (المُستلَم)
    5411
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    150

    Thumbs up 26-10-2009 Cyclone تحديث جديد !

    Tropical Cyclone Strikes Again !

    !!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!
    قبل العمل بالتحديث يجب تحديث البوكس لكي يتم فك الشفرة بنجاح
    Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:
    تم اضافة دعم فك اشفرة للهواتف ASIC 3168 , اصبحت الموديلات المدعومة كالتالي:

    RH-86 2610 v07.04a
    RH-87 2610b v07.04a
    RM-258 2760 v06.82
    RM-258 2760 v07.60
    RM-259 2760b v06.82
    RM-259 2760b v07.60
    RM-298 2630 v07.60
    RM-298 2630 v57.20
    RM-299 2630b v07.60
    RM-299 2630b v57.20
    RM-340 2600c v06.82
    RM-340 2600c v07.60
    RM-341 2600c-b v06.82
    RM-341 2600c-b v07.60
    RM-391 2760h v05.45
    RM-392 2680s v06.17
    RM-392 2680s v56.17
    RM-393 2680s-b v06.17
    RM-393 2680s-b v56.17
    RM-394 1680c v06.82
    RM-394 1680c v07.60
    RM-395 1680c-b v06.82
    RM-395 1680c-b v07.60
    RM-438 7100s v05.22
    RM-438 7100s v05.41
    RM-438 7100s v06.31
    RM-438 7100s v06.32
    RM-439 7100s-b v05.22
    RM-439 7100s-b v05.41
    RM-439 7100s-b v06.31
    RM-439 7100s-b v06.32
    RM-512 2330c v06.46
    RM-512 2330c v06.75
    RM-512 2330c v08.20
    RM-513 2330c-b v06.46
    RM-513 2330c-b v06.75
    RM-513 2330c-b v08.20
    RM-514 2320c v06.75
    RM-514 2320c v08.20
    RM-515 2320c-b v06.75
    RM-515 2320c-b v08.20
    RM-519 2720f v08.20
    RM-520 2720f-b v08.20
    RM-543 2323c v06.75
    RM-543 2323c v08.20
    RM-544 2323c-b v06.75
    RM-544 2323c-b v08.20

    التحميل
    http://rapidshare.com/files/29812993...te26102009.exe

    رابط اخر للتحميل من اخي
    driss
    هنا
    !!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!
    التعديل الأخير تم بواسطة DARIFBS ; 16-11-2009 الساعة 12:03 PM سبب آخر: رابط اخر للتحميل من اخي driss

  6. #4
    .:: Super Moderator ::.
    الصورة الرمزية MouAeD1989

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Syria - draa
    العمر
    28
    Phone
    G925F
    المشاركات
    10,134
    الشَكر (المُعطى)
    10763
    الشَكر (المُستلَم)
    33021
    الإعجاب (المُعطى)
    235
    الإعجاب (المُستلَم)
    411
    غير معجبون (المُعطى)
    1
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    97 مواضيع
    معدل تقييم المستوى
    843

    Smile 28-10-2009 New Cyclonebox firmware Released

    New Cyclonebox Nokia firmware was uploaded to our server.

    Signature: Cyclone Nokia Application v1.09, (Oct 28 2009 15:56:27, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags

    Upgrade your box as usual using Box Maintenance functions.
    To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.

    Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
    To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

    Each box have now 2 SecurityArea upgrade credits, and 3 MainFirmware upgrade credits. Should be enough in case of problems. For more contact me, Cyclonebox or Honey.



    Best Regards,
    Cyclone Team
    الحمد لله
    قَالَ رَسُولُ اللَّهِ ‏‏صَلَّى اللَّهُ عَلَيْهِ وَسَلَّمَ : " ‏إِذَا فَسَدَ
    أَهْلُ ‏الشَّامِ ، فَلَا خَيْرَ فِيكُمْ ، وَلَا يَزَالُ أُنَاسٌ مِنْ أُمَّتِي مَنْصُورِينَ لَا يُبَالُونَ مَنْ خَذَلَهُمْ حَتَّى تَقُومَ السَّاعَةُ "
    اليوم نحن فوق التراب ..وغدا تحت التراب


  7. #5
    .: جيماوي فعال :.
    الصورة الرمزية ضياء الدين

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2008
    الدولة
    العراق $البصرة$
    العمر
    29
    Sonork
    1604031
    Phone
    iphone 6
    المشاركات
    161
    الشَكر (المُعطى)
    227
    الشَكر (المُستلَم)
    347
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    Thumbs up جديد تحديث البوكس06-11-2009 New Cyclonebox Firmware Released


    New Cyclonebox Nokia firmware is uploaded to our server.

    Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application


    Upgrade your box as usual using Box Maintenance functions.
    To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
    Completly Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
    To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.




    wbr
    SiRoYa

  8. #6
    .: جيماوي مشارك :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2008
    الدولة
    tunisia
    المشاركات
    142
    الشَكر (المُعطى)
    84
    الشَكر (المُستلَم)
    273
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي جميع تحديثات Cyclone Box في موضوع واحد ومتجدد (26-10-2009)

    Hi,
    First of all, happy new year to all of our customers.
    New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

    =====================
    Installer v1.03
    02.01.2010
    =====================
    - Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
    - Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

    9A28E119033B91D14D22838C86D0D53C
    9DDBFCFE6E73CED7D8C6268C8EB85723
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    F2D76DFAFD66C7F195F278417DF05888
    F682624FFB08F6D955DBE7D9C0485084
    FCB5C510AF7F09F313D9BDE85A707CC0

    - Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
    - After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
    - To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
    - If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
    - SL Area might be repaired using UNLOCK button for SL2 phones
    - RPL Write bugs fixed ("simlock not accepted" after few tries)
    - Path "/" problem fixed
    - Memory manager updated to v4.94
    - New skin manager introduced (6.53) - removed flash files selection bugs
    - GUI redesigned a bit
    - Nokia Connectivity Cable Driver updated to v7.1.22
    - 2760h RM-391 v06.83 Unlock / Relock added
    - 2330c RM-512 v09.55 Unlock / Relock added
    - 2330c-b RM-513 v09.55 Unlock / Relock added
    - 2720f RM-519 v08.42 Unlock / Relock added
    - 2720f-b RM-519 v08.42 Unlock / Relock added
    - 2720f RM-519 v09.55 Unlock / Relock added
    - 2720f-b RM-519 v09.55 Unlock / Relock added
    - SX4 Bypass during BB5 Unlock removed, is no needed anymore
    - Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
    - After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
    - New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
    - 6220c,3600s booting fixed in new firmware
    - New Secure bootloader v02.10 introduced
    - New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
    - Secure BootAgent v1.00 introduced in new firmware
    - Firmware RTOS Code Updated to v6.0.1
    - Slightly code optimizations and stability improvments in new firmware
    - Secure Bootloader upgrade introduced after box maintenance
    - Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

    Here is example phones unlocked by new RPL Method,
    5800 SW v31.x:
    Code:
    BB5 Unlock Started...
    MCU Version V ICPR72_09w20.8
    MCU Date 09-07-09
    Product RM-356
    Manufacturer (c) Nokia
    IMEI 353205037049770
    Mastercode 323571474
    Simlock Server SIMLOCK SERVER
    Simlock Key 2600300000000000
    Simlock Profile 8000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
    Reading Security Block...
    Security block OK!
    Determining PA Simlock...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_ROM_ID: 4B9B75103E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Determined PA Simlock: PA_SL2
    Checking for Rootkey Hash support and selecting Unlock Method...
    Selected Unlock Method: RPL Calculation
    Booting RAP...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_ROM_ID: 4B9B75103E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Exploiting - running preloader...
    Preloader running OK, Running Custom Loader...
    Custom loader running OK! Working...
    Receiving RPL from Server...
    Cyclone Server (1.0.0.549), Cyclone Box Team 2008, 2009, 2010 - Ready.
    Disconnected from Cyclone Server
    Credits Left: 880
    Saving RPL File to "RM-356_353205037049770_2010-01-02_015618.Unlock.RPL"
    Writing Simlock...
    Simlock ACCEPTED OK !
    MCU Version V ICPR72_09w20.8
    MCU Date 09-07-09
    Product RM-356
    Manufacturer (c) Nokia
    IMEI 353205037049770
    Mastercode 323571474
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Unlock finished!
    E51:
    Code:
    BB5 Unlock Started...
    MCU Version V ICPR71_08w44.4
    MCU Date 11-12-08
    Product RM-244
    Manufacturer (c) Nokia
    IMEI 357663016552576
    Mastercode 152622740
    Simlock Server SIMLOCK SERVER
    Simlock Key 2600300000000000
    Simlock Profile 8000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
    Reading Security Block...
    Security block OK!
    Determining PA Simlock...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_ROM_ID: A8C1D6713E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Determined PA Simlock: PA_SL2
    Checking for Rootkey Hash support and selecting Unlock Method...
    Selected Unlock Method: RPL Calculation
    Booting RAP...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_ROM_ID: A8C1D6713E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Exploiting - running preloader...
    Preloader running OK, Running Custom Loader...
    Custom loader running OK! Working...
    Receiving RPL from Server...
    Cyclone Server (1.0.0.552), Cyclone Box Team 2008, 2009, 2010 - Ready.
    Disconnected from Cyclone Server
    Credits Left: 830
    Saving RPL File to "RM-244_357663016552576_2010-01-02_051510.Unlock.RPL"
    Writing Simlock...
    Simlock ACCEPTED OK !
    MCU Version V ICPR71_08w44.4
    MCU Date 11-12-08
    Product RM-244
    Manufacturer (c) Nokia
    IMEI 357663016552576
    Mastercode 152622740
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Unlock finished!
    Download Link: http://rapidshare.com/files/32908443...xInstaller.exe

    ! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

    Best Regards,
    Cyclone Team

    (stay tuned.... in January wink )

    رابط التحميل المباشر
    Cyclone Installer v1.03

  9. #7
    صديق المنتدى
    الصورة الرمزية DARIFBS

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    المملكة المغربية
    Phone
    Nokia
    المشاركات
    1,796
    الشَكر (المُعطى)
    1282
    الشَكر (المُستلَم)
    5411
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    150

    Lightbulb 05/01/2012 CycloneBox Hotfix Released

    اصلاح مشكل فك شفرة BB5 القديم بالتحديث السابق.
    انسخ وعوض هده الملف بعد فك الضغط عليه بالملف الموجود مسبقا بالمسار
    X:\programfiles\Cyclonebox

    التحميل
    http://rapidshare.com/files/330741437/Cyclone.zip

  10. #8
    .: جيماوي فعال :.
    الصورة الرمزية ضياء الدين

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2008
    الدولة
    العراق $البصرة$
    العمر
    29
    Sonork
    1604031
    Phone
    iphone 6
    المشاركات
    161
    الشَكر (المُعطى)
    227
    الشَكر (المُستلَم)
    347
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    0
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    Thumbs up

    =====================
    Installer v1.04
    06.01.2010
    =====================

    - Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!



  11. #9
    صديق المنتدى
    الصورة الرمزية gsm.magic

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    المــــغرب
    Sonork
    100.1592533
    Phone
    غير قار
    المشاركات
    4,112
    الشَكر (المُعطى)
    10457
    الشَكر (المُستلَم)
    14098
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    515

    Talking جميع تحديثات Cyclone Box في موضوع واحد ومتجدد (06-01-2010)

    Hi to all cool

    Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.
    One condition you need to met, you need have 200 credits on your account.

    Stay tuned for some NCK-thing wink

    Best Regards,
    Cyclone Team.

  12. #10
    صديق المنتدى
    الصورة الرمزية gsm.magic

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    المــــغرب
    Sonork
    100.1592533
    Phone
    غير قار
    المشاركات
    4,112
    الشَكر (المُعطى)
    10457
    الشَكر (المُستلَم)
    14098
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    1
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    515

    Lightbulb جميع تحديثات Cyclone Box في موضوع واحد ومتجدد (16-01-2010)

    Hi,

    - Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
    - Unlocking Method is now being selected before unlock
    - Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
    - Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

    !! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

    KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

    Avaiable Unlock Methods Now:


    Quote:
    PM308 Recalculation (Standalone, Free)
    NCK Calculation (Standalone, Free, New Method)
    NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
    RPL Calculation (Server Based, Need Credits)
    (need select needed unlock method before unlock)

    Some phones unlocked by new method of NCK Calculation:

    3600 SL2 HASH 9DDB


    كود:
    BB5 Unlock Started...
    MCU Version	V 07.23
    MCU Date	17-07-09
    Product		RM-352
    Manufacturer	(c) Nokia            
    IMEI		353661016041511
    Mastercode	261533754
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2600300000000000
    Simlock Profile	8000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26003F
    Reading Security Block...
    Security block OK!
    Determining PA Simlock...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		1240001610F05850C9695BBBB518C05E116F9CA1
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: E4BA39EE248FC5E165E280B6AD60C5C0B1A1DA6D
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Determined PA Simlock: PA_SL2
    Checking for Rootkey Hash support with selected Unlock Method...
    Selected Unlock Method: NCK Calculation (new method)
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		1240001610F05850C9695BBBB518C05E116F9CA1
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    Exploiting - running preloader...
    Preloader running OK, Running Custom Loader...
    Custom loader running OK! Working...
    #pw+949788008380325+1#
    #pw+854251965631463+2#
    #pw+914751634966481+3#
    #pw+253083871743310+4#
    #pw+160466531792339+5#
    #pw+300636055043893+6#
    #pw+831255876340647+7#
    Sending NCK Code (Level 7)..
    NCK Accepted! Phone unlocked OK!
    MCU Version	V 07.23
    MCU Date	17-07-09
    Product		RM-352
    Manufacturer	(c) Nokia            
    IMEI		353661016041511
    Mastercode	261533754
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2600300000000000
    Simlock Profile	8000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26003F
    Simlock NCK	#pw+831255876340647+7#
    Unlock finished!

    5300 SL1 HASH BAF3

    كود:
    BB5 Unlock Started...
    MCU Version	V 07.20
    MCU Date	23-10-08
    Product		RM-174
    Manufacturer	(c) Nokia.           
    IMEI		356407014798521
    Mastercode	471632634
    Simlock Server	SIMLOCK SERVER VERSION 63
    Simlock Key	2600600000000000
    Simlock Profile	8000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26006F
    Simlock NCK	#[email protected]˙˙˙˙˙˙˙˙˙˙+17#
    Simlock NCK	#pw+˙˙˙˙˙8€+255#
    Simlock NCK	#pw+`+38#
    Simlock NCK	#pw+˙˙˙ř4&o˙+255#
    Reading Security Block...
    Security block OK!
    Determining PA Simlock...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
    CMT_EM_ASIC_ID:		00000232
    CMT_EM_ASIC_ID:		00000353
    CMT_PUBLIC_ID:		22C000133A0B6E561E7820319A02ED6A64141878
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	191EC665
    CMT_SECURE_ROM_CRC:	DFAAF68F
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Determined PA Simlock: PA_SL
    Checking for Rootkey Hash support with selected Unlock Method...
    Selected Unlock Method: NCK Calculation (new method)
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
    CMT_EM_ASIC_ID:		00000232
    CMT_EM_ASIC_ID:		00000353
    CMT_PUBLIC_ID:		22C000133A0B6E561E7820319A02ED6A64141878
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	191EC665
    CMT_SECURE_ROM_CRC:	DFAAF68F
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    Exploiting - running preloader...
    Preloader running OK, Running Custom Loader...
    Custom loader running OK! Working...
    #pw+160352032409019+1#
    #pw+973120735381744+2#
    #pw+821765151806152+3#
    #pw+691221967364775+4#
    #pw+282254235199826+5#
    #pw+674406233058521+6#
    #pw+159388652648611+7#
    Sending NCK Code (Level 7)..
    NCK Accepted! Phone unlocked OK!
    MCU Version	V 07.20
    MCU Date	23-10-08
    Product		RM-174
    Manufacturer	(c) Nokia.           
    IMEI		356407014798521
    Mastercode	471632634
    Simlock Server	SIMLOCK SERVER VERSION 63
    Simlock Key	2600600000000000
    Simlock Profile	8000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26006F
    Simlock NCK	#[email protected]˙˙˙˙˙˙˙˙˙˙+17#
    Simlock NCK	#pw+˙˙˙˙˙8€+255#
    Simlock NCK	#pw+`+38#
    Simlock NCK	#pw+˙˙˙ř4&o˙+255#
    Unlock finished
    E51 SL2 HASH CAEEBB


    كود:
    BB5 Unlock Started...
    MCU Version	V ICPR71_08w44.4
    MCU Date	11-12-08
    Product		RM-244
    Manufacturer	(c) Nokia
    IMEI		357663016552576
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2600100000000000
    Simlock Profile	8000000000000006
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 26001F
    Reading Security Block...
    Security block OK!
    Determining PA Simlock...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0E60010930850058EEBC00CD174EE90CEB054FF0
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	A8C1D671
    CMT_SECURE_ROM_CRC:	3E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Determined PA Simlock: PA_SL2
    Checking for Rootkey Hash support with selected Unlock Method...
    Selected Unlock Method: NCK Calculation (new method)
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101021103
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0E60010930850058EEBC00CD174EE90CEB054FF0
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	A8C1D671
    CMT_SECURE_ROM_CRC:	3E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    Exploiting - running preloader...
    Preloader running OK, Running Custom Loader...
    Custom loader running OK! Working...
    #pw+994514387188636+1#
    #pw+274615204717885+2#
    #pw+842137240978606+3#
    #pw+544842230747164+4#
    #pw+653436892097337+5#
    #pw+113577555381583+6#
    #pw+360432392883102+7#
    Sending NCK Code (Level 7)..
    NCK Accepted! Phone unlocked OK!
    MCU Version	V ICPR71_08w44.4
    MCU Date	11-12-08
    Product		RM-244
    Manufacturer	(c) Nokia
    IMEI		357663016552576
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2600100000000000
    Simlock Profile	8000000000000006
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 26001F
    Simlock NCK	#pw+360432392883102+7#
    Unlock finished!

    Download Link : http://rapidshare.com/files/340620565/Cyclone.exe

    (REPLACE EXE at C:\Program Files\Cyclone Box\)

    Best Regards,
    "Sleeping" Cyclone Team

صفحة 1 من 2 12 الأخيرةالأخيرة

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •