1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : SP631_V10.0_20181116.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 460800
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : Forced FlashWrite enabled!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x21
PMTMng : Update PMT Ok!

CODE : prodnv.img
ERASE : UBOOT
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE : vbmeta-sign.img
CODE : ltemodem.bin
CODE : ltedsp.bin
CODE : ltegdsp.bin
CODE : pmsys.bin
CODE : wcnmodem.bin
CODE : boot.img
CODE : dt.img
CODE : recovery.img
FSIMG : system.img
FSIMG : userdata.img
Failed to update block!
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!


Flashing finished!

Reconnect Power/Cable!


Done!
Elapsed: 00:05:03

Operation : Flash Firmware [ v2.02 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : SP631_V10.0_20181116.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 460800
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : Forced FlashWrite enabled!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x21
PMTMng : Update PMT Ok!

CODE : prodnv.img
ERASE : UBOOT
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE : vbmeta-sign.img
CODE : ltemodem.bin
CODE : ltedsp.bin
CODE : ltegdsp.bin
CODE : pmsys.bin
CODE : wcnmodem.bin
CODE : boot.img
CODE : dt.img
CODE : recovery.img
FSIMG : system.img
FSIMG : userdata.img
CODE : Logo.bmp
CODE : Logo.bmp
FSIMG : cache.img
FSIMG : vendor.img
ERASE : L_RUNTIMENV1
ERASE : MISC
CODE : tos-sign.bin
CODE : sml-sign.bin
UBOOT : u-boot-sign.bin
FSIMG : persist.img

Flashing finished!

Reconnect Power/Cable!


Done!
Elapsed: 00:06:12