قائمة الاعضاء المشار اليهم

النتائج 1 إلى 1 من 1

الموضوع: Oppo A3S done

  1. #1
    .: جيماوي نشيط :.
    الصورة الرمزية مصطفى جروب

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2012
    الدولة
    Sohag, Egypt
    Phone
    01012663030
    المشاركات
    421
    الشَكر (المُعطى)
    123
    الشَكر (المُستلَم)
    202
    الإعجاب (المُعطى)
    0
    الإعجاب (المُستلَم)
    10
    غير معجبون (المُعطى)
    0
    غير معجبون (المُستلَم)
    0
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    23

    افتراضي Oppo A3S done

    EasyJtag Suite Classic ver.: 3.6.1.15 / wxWidgets 3.1.2-W-U started.
    OS ver.: Windows 10 (build 18362). Admin rights FAIL
    Android Explorer ver:1.0.0.13
    Autorun Agent ver:1.0.0.0
    Crash Reporting ver:1.4.0.3
    eMMC Odin ver:1.0.0.6
    QUALCOMM Direct ver:1.0.6936.8894
    Android ADB API ver:2.0.0.0
    FTDI API ver:3.2.4.0
    LibUSB API ver:1.2.6.0
    Visual C++ Runtime ver:10.0.30319.1
    Setting box Pinout ...


    Box Drivers version: 10.0.18362.1, are OK
    Z3X Card Serial : AA4D-3989 , ver: 22
    Z3X Card Activation [JTAGPLUS] : NOT ACTIVATED
    Z3X Card Activation [LG] : NOT ACTIVATED
    Z3X Card Activation [SAMS] : ACTIVATED
    Z3X Card Activation [JTAG] : ACTIVATED




    Found 2 serial devices
    COM1 ACPI\VEN_PNP&DEV_0501 Communications Port (COM1)
    COM13 USB\VID_0325&PID_0032&REV_0100&MI_00 USB Serial Device (COM13)
    Selected pinout: EasyJTAG GEN1 ISP Pinout
    Change EasyJTAG Pinout OK
    Z3X EasyJtag Software ver. 3.6.1.15
    Loading eMMC GEN1 Firmware... IO: 2800 mV
    Box S/N: 1400F0176674B179, ,FW Ver.: 01.63
    Warning: CMD Pullup Level (237 mV) too low , check cables etc.!
    CMD Active Level:1505 mV
    Box IO Level:2800 mV
    CLK Rate:21000 kHz
    Bus Width:1bit,SDR
    HiPower mode is off!
    Can't init device, Reason: CMD Timeout Error
    Done.


    Z3X EasyJtag Software ver. 3.6.1.15
    Loading eMMC GEN1 Firmware... IO: 2800 mV
    Box S/N: 1400F0176674B179, ,FW Ver.: 01.63
    Warning: CMD Pullup Level (268 mV) too low , check cables etc.!
    CMD Active Level:1505 mV
    Box IO Level:2800 mV
    CLK Rate:21000 kHz
    Bus Width:1bit,SDR
    HiPower mode is off!
    Can't init device, Reason: CMD Timeout Error
    Done.


    Z3X EasyJtag Software ver. 3.6.1.15
    Loading eMMC GEN1 Firmware... IO: 2800 mV
    Box S/N: 1400F0176674B179, ,FW Ver.: 01.63
    CMD Pullup Level:1990 mV
    CMD Active Level:2557 mV
    Box IO Level:2800 mV
    CLK Rate:21000 kHz
    Bus Width:1bit,SDR
    HiPower mode is off!
    ---------- eMMC Device Information ----------


    eMMC CID : 150100514536334D42068A0D964EA592
    eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
    eMMC Manufacturer ID: 0015 , OEM ID: 0100
    eMMC Date: 10/2018 Rev.0x6
    eMMC NAME: QE63MB , S/N: 2316146254
    eMMC NAME (HEX): 514536334D42
    IC Name: Samsung , KMQE60013M-B318/16GB @bga221
    EMMC ROM1 (Main User Data) Capacity: 14910 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
    EMMC RPMB is programmed and written 72265 times
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    EMMC Password Locked: No
    Extended CSD rev 1.8 (MMC 5.1)
    Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
    H/W reset function [RST_N_FUNCTION]: 0x01
    High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
    Partitioning Support [PARTITIONING_SUPPORT]: 0x07
    Device support partitioning feature
    Device can have enhanced tech.
    Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
    ---------------------------------------------
    Backup saved: QE63MB_2316146254_20191017_1721.extcsd
    Found valid GPT with protective MBR; using GPT.
    Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
    Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
    Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
    Logical sector size: 0x200 bytes ,First/Last usable sector: 34,30535646
    Partition info successfully found
    ------ Android information ------
    Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
    Build ID: OPM1.171019.026
    Release Base ID: 8.1.0
    Architecture ABI: arm64-v8a
    Device manufacturer: OPPO
    Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190923.222735 release-keys
    ---------------------------------------------
    Detected USERDATA USERDATA : 0x0158000000 (9.184GB)
    Unable to mount USERDATA , code : 95
    Done.


    Z3X EasyJtag Software ver. 3.6.1.15
    Loading eMMC GEN1 Firmware... IO: 2800 mV
    Box S/N: 1400F0176674B179, ,FW Ver.: 01.63
    CMD Pullup Level:1969 mV
    CMD Active Level:2629 mV
    Box IO Level:2800 mV
    CLK Rate:21000 kHz
    Bus Width:1bit,SDR
    HiPower mode is off!
    ---------- eMMC Device Information ----------


    eMMC CID : 150100514536334D42068A0D964EA592
    eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
    eMMC Manufacturer ID: 0015 , OEM ID: 0100
    eMMC Date: 10/2018 Rev.0x6
    eMMC NAME: QE63MB , S/N: 2316146254
    eMMC NAME (HEX): 514536334D42
    IC Name: Samsung , KMQE60013M-B318/16GB @bga221
    EMMC ROM1 (Main User Data) Capacity: 14910 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
    EMMC RPMB is programmed and written 72265 times
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    EMMC Password Locked: No
    Extended CSD rev 1.8 (MMC 5.1)
    Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
    H/W reset function [RST_N_FUNCTION]: 0x01
    High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
    Partitioning Support [PARTITIONING_SUPPORT]: 0x07
    Device support partitioning feature
    Device can have enhanced tech.
    Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
    ---------------------------------------------
    Backup saved: QE63MB_2316146254_20191017_1722.extcsd
    Found valid GPT with protective MBR; using GPT.
    Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
    Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
    Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
    Logical sector size: 0x200 bytes ,First/Last usable sector: 34,30535646
    Partition info successfully found
    ------ Android information ------
    Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
    Build ID: OPM1.171019.026
    Release Base ID: 8.1.0
    Architecture ABI: arm64-v8a
    Device manufacturer: OPPO
    Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190923.222735 release-keys
    ---------------------------------------------
    Detected USERDATA USERDATA : 0x0158000000 (9.184GB)
    Unable to mount USERDATA , code : 95
    Done.


    Z3X EasyJtag Software ver. 3.6.1.15
    Loading eMMC GEN1 Firmware... IO: 2800 mV
    Box S/N: 1400F0176674B179, ,FW Ver.: 01.63
    CMD Pullup Level:1980 mV
    CMD Active Level:2629 mV
    Box IO Level:2800 mV
    CLK Rate:21000 kHz
    Bus Width:1bit,SDR
    HiPower mode is off!
    ---------- eMMC Device Information ----------


    eMMC CID : 150100514536334D42068A0D964EA592
    eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
    eMMC Manufacturer ID: 0015 , OEM ID: 0100
    eMMC Date: 10/2018 Rev.0x6
    eMMC NAME: QE63MB , S/N: 2316146254
    eMMC NAME (HEX): 514536334D42
    IC Name: Samsung , KMQE60013M-B318/16GB @bga221
    EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
    EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
    EMMC RPMB is programmed and written 72265 times
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    EMMC Password Locked: No
    Extended CSD rev 1.8 (MMC 5.1)
    Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
    H/W reset function [RST_N_FUNCTION]: 0x01
    High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
    Partitioning Support [PARTITIONING_SUPPORT]: 0x07
    Device support partitioning feature
    Device can have enhanced tech.
    Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
    ---------------------------------------------
    Writing Recovery Command to MISC (35)
    Done.



    التعديل الأخير تم بواسطة مصطفى جروب ; 17-10-2019 الساعة 10:37 PM سبب آخر: اضافة
    Mostafa_lock
    Developers

  2. الشَكر ben khalifa شَكر
    الإعجاب ™MOHAMED مُعجَبون

  3. تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •