الجهاز جايلى واقف على اللوجو وبعد محاولات كثيره للفورمات الجهاز فصل خالص
ده الانفو قبل الفورمات
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM28)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
Build ID: LMY47I
Display ID: l8_dhs_f23_32a4_ls_lcd_en_qhd_b125_v03
Version: 7.0
Build Date: 2017年 11月 21日 星期二 17:08:11 CST
Build Date: 1511255291
Model: F3 Plus
Brand: dhs
Device: F3 Plus
Manufacturer: leimin
Mediatek Version Release: ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
Region: US
This phone have FRP partition.
Partition is damaged or encripted.
IMEI[1]: 359215086440444
IMEI[2]: 359215086440451
Read done.
Wait untill phone will start charging.
All done.
وده الانفو بعد الفورمات
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port_V1632 (COM27)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 484a019064314734a5
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
Partition entry is empty.
Read done.
Wait untill phone will start charging.
All done.
ارجو فلاشه او حل انى اكتب الادريس الصحيح للفورمات
شكرا مقدما
المفضلات