محتاج فلاشه tecno c7
info
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM71)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: eec72fe86813dd5
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: eec72fe86813dcd
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
على ميركال
Set PreLoader USB VCOM Port (COM71)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03AB800000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x80000000
Reading infr(EMMC)...
Port error1
Port error1
>>Done.
رد مع اقتباس
.gif)
المفضلات