كود PHP:
Welcome to Octoplus Box Samsung software version 2.7.7
Selected BOOT file: C:\Users\TEMP\Desktop
\ENG_BOOT_G935A_PG2.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G935A into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7.4 Software version.
Selected BOOT file: C:\Users\TEMP\Desktop
\ENG_BOOT_G935A__PJ2.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G935A into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J610F
Operation: Read Codes
"Devices with Unlock App (branded to T-Mobile, MetroPCS, etc.) are not
supported!
Make sure device requests to enter unlock code and only then perform
“Read Codes” operation!"
Continue?
Searching for a phone. Please wait...
Warning: Selected model (SM-J610F) differs from the detected one
(SM-G610F)!
If you want select (SM-G610F) as (SM-J610F) model, please check
"manual select".
Read codes failed
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G610F
Operation: Unlock
Detected phone model: SM-G610F
Firmware compiled date: Mon Apr 2 19:31:42 KST 2018
PDA version: G610FDXU1BRD1
CSC version: G610FOLB1BRB3
SW version: G610FDDU1BRB3
Phone SN: R58H95XYEHK
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-04-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: ready
Codename: on7xeltedd
Checking Root:
Phone is not Rooted.
Phone unlocking failed
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G610F
Operation: Repair Network
Detected phone model: SM-G610F
Firmware compiled date: Mon Apr 2 19:31:42 KST 2018
PDA version: G610FDXU1BRD1
CSC version: G610FOLB1BRB3
SW version: G610FDDU1BRB3
Phone SN: R58H95XYEHK
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-04-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: ready
Codename: on7xeltedd
Checking Root:
Phone is not Rooted.
Repairing network failed.
Performed by 2.7.7.4 Software version.
Selected AP file: C:\Users\TEMP\Desktop\G610F 7.0 TWRP.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G610F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing Firmware Failed
Performed by 2.7.7.4 Software version.
Selected AP file: C:\Users\TEMP\Desktop\G610F 7.0 TWRP.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-G610F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G610F
Operation: Unlock
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G610F
Firmware compiled date: Mon Apr 2 19:31:42 KST 2018
PDA version: G610FDXU1BRD1
CSC version: G610FOLB1BRB3
SW version: G610FDDU1BRB3
Phone SN: R58H95XYEHK
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-04-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: ready
Codename: on7xeltedd
Checking Root:
Phone is not Rooted.
Phone unlocking failed
Performed by 2.7.7.4 Software version.
Selected AP file: F:\CF-Auto-Root-on7xelte-on7xeltedd-
smg610f.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G610F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G610F
Operation: Unlock
Detected phone model: SM-G610F
Firmware compiled date: Mon Apr 2 19:31:42 KST 2018
PDA version: G610FDXU1BRD1
CSC version: G610FOLB1BRB3
SW version: G610FDDU1BRB3
Phone SN: R58H95XYEHK
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-04-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: ready
Codename: on7xeltedd
Checking Root:
Phone unlocking failed
Performed by 2.7.7.4 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G610F
Operation: Repair Network
Detected phone model: SM-G610F
Firmware compiled date: Mon Apr 2 19:31:42 KST 2018
PDA version: G610FDXU1BRD1
CSC version: G610FOLB1BRB3
SW version: unknown
Phone SN: R58H95XYEHK
Android version: 7.0 (NRD90M)
Sales code: XME
Country: MALAYSIA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: unknown
Security patch level: 2018-04-01
Warranty Void: 1
SIM 1 status: not ready
SIM 2 status: not ready
Codename: on7xeltedd
Checking Root:
Phone is Rooted.
Checking DaemonSU...OK
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Performed by 2.7.7.4 Software version.
المفضلات