Innjoo halo2 LTE

**muddather** · 07-12-2018, 07:20 PM

سلام عليكم

عندي هاتف Innjoo halo2 LTE معلق علي اللوقو , سحبت الفلاشة و رجعتها نفس الشي , بيقبل الفورمات , عندي CM2

بحثت علي النت لم اجد فلاشة لهذا الهاتف

هذا انفو الجهاز علي الCM2

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E6977690100102063B5D6BA
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100001BAD69363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x369D1F4FC6D659B56C71B24667D93503
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : InnJoo
ProdName : Halo2_LTE
ProdModel : Halo2 LTE
Device : Halo2_LTE
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : Halo2-LTE-6.0-InnJoo-20170208-V1

ارجو المساعد و شكرا

07-12-2018 07:20 PM

**عبدالله أغا** · 07-12-2018, 09:03 PM

تفضل حبيبي
شوف هي الفلاشه

هنا

**muddather** · 07-12-2018, 11:08 PM

المشاركة الأصلية كتبت بواسطة عبدالله أغا

تفضل حبيبي
شوف هي الفلاشه

هنا

شكرا اخ عبد الله علي المتابعة

لكن موديل جهازي Innjoo halo 2 LTE نوع المعالج MT6737M يعني MTK ورابط الفلاشة الانت رافعها هي للموديل Halo 2 3G ذات المعالج SPD

انا محتاج فلاشة للموديل Halo 2 LTE ومعالج هذا الموديل MT6737M

وشكرا علي المتابعة اخ عبد الله

**°°.."Y"S"F"GSM"..°°** · 08-12-2018, 12:29 AM

ارفع الانفو ع الميركل يا غالي لسهولة الرد و المتابعة

**muddather** · 08-12-2018, 09:58 AM

هذا انفو الجهاز علي InfinityBox CM2MTK

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 270 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E6977690100102063B5D6BA
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100001BAD69363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x369D1F4FC6D659B56C71B24667D93503
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : InnJoo
ProdName : Halo2_LTE
ProdModel : Halo2 LTE
Device : Halo2_LTE
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : Halo2-LTE-6.0-InnJoo-20170208-V1

EXTRA :
LCD : Not info available

LCD Res : 1280x720
TOUCH [0] : GT1XX
CAM [0] : gc2365_mipi_raw
CAM [1] : ov8856_mipi_raw
CAM [2] : gc5005_mipi_raw
CAM [3] : sp5506_mipi_raw
MODEM : t637_hct6737m_65_m0-lwg_dsds_cotsx-_3m_gsm4p_w1_8_fdd1_3_7_8_20_skypa
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

**muddather** · 08-12-2018, 01:44 PM

مازلت في انتظار المساعدة

**muddather** · 13-12-2018, 02:02 PM

شباب ارجو الرد

**SALIHMOB** · 13-12-2018, 04:00 PM

ارفع ملف الاسكتر للباكاب او انفو علي المريكل

**SALIHMOB** · 13-12-2018, 04:02 PM

كود:

######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE II MIRACLE=-#####################################################
- general: MTK_PLATFORM_CFG
  info:
    - config_version: V1.1.2
      platform: MT6735M
      project: magc6735m_65c_l1
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
- partition_index: SYS0
  partition_name: preloader
  file_name: preloader_magc6735m_65c_l1.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x400000
  region: EMMC_BOOT_1
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00


- partition_index: SYS1
  partition_name: pgpt
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS2
  partition_name: proinfo
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x80000
  physical_start_addr: 0x80000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00


- partition_index: SYS3
  partition_name: nvram
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x380000
  physical_start_addr: 0x380000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00


- partition_index: SYS4
  partition_name: protect1
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x880000
  physical_start_addr: 0x880000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00


- partition_index: SYS5
  partition_name: protect2
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1280000
  physical_start_addr: 0x1280000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00


- partition_index: SYS6
  partition_name: lk
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1C80000
  physical_start_addr: 0x1C80000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS7
  partition_name: para
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1D00000
  physical_start_addr: 0x1D00000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS8
  partition_name: boot
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1D80000
  physical_start_addr: 0x1D80000
  partition_size: 0x1000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS9
  partition_name: recovery
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2D80000
  physical_start_addr: 0x2D80000
  partition_size: 0x1000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS10
  partition_name: logo
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3D80000
  physical_start_addr: 0x3D80000
  partition_size: 0x800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS11
  partition_name: expdb
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4580000
  physical_start_addr: 0x4580000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS12
  partition_name: seccfg
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4F80000
  physical_start_addr: 0x4F80000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS13
  partition_name: oemkeystore
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x5000000
  physical_start_addr: 0x5000000
  partition_size: 0x200000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS14
  partition_name: secro
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x5200000
  physical_start_addr: 0x5200000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS15
  partition_name: keystore
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x5800000
  physical_start_addr: 0x5800000
  partition_size: 0x800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS16
  partition_name: tee1
  file_name: tz1.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x6000000
  physical_start_addr: 0x6000000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS17
  partition_name: tee2
  file_name: tz2.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x6500000
  physical_start_addr: 0x6500000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS18
  partition_name: frp
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x6A00000
  physical_start_addr: 0x6A00000
  partition_size: 0x100000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00


- partition_index: SYS19
  partition_name: nvdata
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x6B00000
  physical_start_addr: 0x6B00000
  partition_size: 0x2000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS20
  partition_name: metadata
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x8B00000
  physical_start_addr: 0x8B00000
  partition_size: 0x2500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00


- partition_index: SYS21
  partition_name: system
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0xB000000
  physical_start_addr: 0xB000000
  partition_size: 0x6D000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS22
  partition_name: cache
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x78000000
  physical_start_addr: 0x78000000
  partition_size: 0x19000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS23
  partition_name: userdata
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x91000000
  physical_start_addr: 0x91000000
  partition_size: 0x13FF80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00


- partition_index: SYS24
  partition_name: flashinfo
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF0084
  physical_start_addr: 0xFFFF0084
  partition_size: 0x1000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00


- partition_index: SYS25
  partition_name: sgpt
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF0004
  physical_start_addr: 0xFFFF0004
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

بص علي الانفو دا نفس اللي انت عاوزو ةلا لا

**muddather** · 14-12-2018, 04:09 PM

المشاركة الأصلية كتبت بواسطة SALIHMOB

ارفع ملف الاسكتر للباكاب او انفو علي المريكل

لا استطيع ان اعمل باكاب لكن فقط يكنني ان اعمل قراءة للهاتف , عندما اريد ان اعمل باكاب فقط تاتي هذه الرسالة

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : InnJoo
ProdName : Halo2_LTE
ProdModel : Halo2 LTE
Device : Halo2_LTE
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : Halo2-LTE-6.0-InnJoo-20170208-V1

Fatal error, buffer empty! Phone connection lost???
Error while reading block! Something went wrong

وهذه قراءة للهاتف

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 270 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 422201F46E6977690100102063B5D6BA
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100001BAD69363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x369D1F4FC6D659B56C71B24667D93503
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : InnJoo
ProdName : Halo2_LTE
ProdModel : Halo2 LTE
Device : Halo2_LTE
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : Halo2-LTE-6.0-InnJoo-20170208-V1

قائمة الاعضاء المشار اليهم

الموضوع: Innjoo halo2 LTE

أدوات الموضوع

بحث في الموضوع

عرض

Innjoo halo2 LTE

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة