لم يجبني احد تعقدت المسالة اكثر بعد عمل format and reset لا يقبل كتابة اي دامب EasyJtag Suite Classic ver.: 3.1.0.0 / wxWidgets 3.1.0-W-U started.OS ver.: Windows 7 (build 7601, Service Pack 1). Admin rights OK
Android Explorer ver:1.0.0.13
Autorun Agent ver:1.0.0.0
Crash Reporting ver:1.4.0.3
eMMC Odin ver:1.0.0.6
QUALCOMM Direct ver:1.0.6688.36675
Android ADB API ver:2.0.0.0
FTDI API ver:3.2.4.0
LibUSB API ver:1.2.6.0
Visual C++ Runtime ver:10.0.30319.1
Setting box Pinout ...
Found 1 serial devices
COM4 USB\VID_0325&PID_0032&REV_0100&MI_00 Easy Jtag Control Port (COM4)
Selected pinout: EasyJTAG GEN1 ISP Pinout
Change EasyJTAG Pinout OK
Compression is ON
Z3X EasyJtag Software ver. 3.1.0.0
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 101009179BED7E59, ,FW Ver.: 01.63
CMD Pullup Level:2990 mV
CMD Active Level:3155 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID : 150100514E5730304D00E58AC22F91BE
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 09/2014 Rev.0x0
eMMC NAME: QNW00M , S/N: 3851076143
eMMC NAME (HEX): 514E5730304D
IC Name: Samsung , KMQNW000SM-B316/8GB @bga221
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: QNW00M_3851076143_20180818_1800.extcsd
Done.
Checking NAND Image :
Autodetected RAW data
File successefuly loaded!
Found ROM2 and automatically selected.
Found ROM3 and automatically selected.
Found EXT CSD and automatically selected.
Processing file...
Processing file...
Processing file...
Processing file...
Running:Repair extCSD...
Z3X EasyJtag Software ver. 3.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2990 mV
CMD Active Level:3155 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
------------Parsing extCSD------------
Can't open output file !
Done.
Z3X EasyJtag Software ver. 3.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2990 mV
CMD Active Level:3155 mV
Can't open output file !
Done.
Z3X EasyJtag Software ver. 3.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2990 mV
CMD Active Level:3155 mV
Can't open output file !
Done.
Z3X EasyJtag Software ver. 3.1.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2990 mV
CMD Active Level:3155 mV
Can't open output file !
Done.
المفضلات