User selected Preloader file : preloader_s4050ap.bin
Operation : Init Preloader [ v1.40 ]
Supported HW by Preloader :
FlashID [0] CID : 110100303034474530 , Name : 004GE0 , Vendor : 11 , [TOSHIBA]
FlashID [1] CID : 90014A483447326111 , Name : H4G2a , Vendor : 90 , [HYNIX]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 2 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611102CC566A62B2B1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611102CC566A62B2B1
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
SecCfg Passed , 1799
BL : BBID supported by BootLoader!
Supported HW by Preloader :
FlashID [0] CID : 110100303034474530 , Name : 004GE0 , Vendor : 11 , [TOSHIBA]
FlashID [1] CID : 90014A483447326111 , Name : H4G2a , Vendor : 90 , [HYNIX]
BL : Storage supported by BootLoader!
Sending BootLoader ...
Preloader Sent , Init passed
SecCfg Passed , 1799
PartTable Init Ok , Count : 14
All Done
Done!
Elapsed: 00:00:18
Reconnect Power/Cable!
Operation : Check / Read Info [ v1.40 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 41 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611102CC566A62B2B1
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
Error : DA init Failed! Error code : 0x5
LErr : EMICFG_NOT_FOUND
Boot Error!
Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!
المفضلات