INFERNO UniTool 1.3.4 Huawei Modem Zong Telenor Moblink Solved Stuck in Boot Mode
VolcanoBox Inferno Tool UniTool 1.3.4
World's Unique Solution for Huawei Modems
Special Gift for Zong & Telenor & Mobilink
Clouds & Wingle Users
What's new ?
- Solved Modems Stuck in Bootloop Mode after Patch Flash
- Added backup GPT info files
- Added Automatically copy of updated GPT file when backup factory file
- Added Option for User to select Rewrite GPT when write factory file
- Added Option for User to select Update GPT when write factory file
- Added reboot into edl
- Added reboot into recovery
- Added reboot into bootloader
- Added some user full logs which helps to repair phones
- Added Word's 1st Huawei Modems Unlocking Solution (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Huawei Modem Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Zong Huawei Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Zong Huawei Wingle Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Zong Huawei Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Zong Huawei Cloud Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Telenor Huawei Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Telenor Huawei Wingle Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Telenor Huawei Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added World's 1st Telenor Huawei Cloud Boot Repair (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Mobilink Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Telenor Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Zong Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Mobilink Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Telenor Huawei 3g Cloud Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
- Added Zong Huawei 3g Wingle Network Unlock (This is Beta, it might have some bugs or problems. next upcoming vers will be Improve)
!! Special Note for those Users Who get Modem Stuck in Boot-loop Mode (dead) after Patch Flash
Just Repeat Operation from start with Inferno it will make your Modem Alive & Unlock !!
Video Tutorial
Complete Details of each ver & steps you have to do while unlock
- Model: E5330s-B2
- Supported Ver: 21.210.21.xx.274
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5330s-B2
- Supported Ver: 21.210.21.xx.306
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5330s-B2
- Supported Ver: 21.210.21.xx.1065
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5330s-B2
- Supported Ver: 21.210.25.xx.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5330s-B2
- Supported Ver: 21.210.25.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5330s-B2
- Supported Ver: 21.210.25.xx.1065
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.13.xx.274
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.13.xx.1065
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.13.xx.306
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.17.xx.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.17.xx.1065
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E8231-S1
- Supported Ver: 22.618.17.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: No Need
- Note: Make Patch Flash Twice
- Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.
- Model: E5573cs-609
- Supported Ver: 21.318.xx.xx.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
- Model: E5573cs-609
- Supported Ver: 21.323.00.00.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
- Model: E8372H-608
- Supported Ver: 21.316.01.01.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
- Model: E8372H-608
- Supported Ver: 21.316.01.02.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
- Model: E8372H-608
- Supported Ver: 21.316.01.03.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.
- Model: E8372H-608
- Supported Ver: 21.316.01.04.274
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
- Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
- Model: E5573cs-322
- Supported Ver: 21.318.xx.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
- Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
- Model: E5573cs-322
- Supported Ver: 21.323.xx.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
- Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
- Model: E8372h-153
- Supported Ver: 21.313.xx.xx.306
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
- Model: E8372h-153
- Supported Ver: 21.318.xx.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
- Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
- Model: E8372h-153
- Supported Ver: 21.321.xx.xx.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: No Need
- Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
- Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"
- Model: E5573s-320
- Supported Ver: 21.315.01.00.306
- Test Point: No
- Erase: No
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
- Model: E5573s-320
- Supported Ver: 21.315.01.01.306
- Test Point: Yes
- Erase: Yes
- Patch Flash: Yes
- Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
- Imei Repair Command: No Need
- Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.
Detailed Tutorial How to Unlock
- Plug locked device into Pc Usb
- Run device temporary Drive auto run setup ( if not installed before )
- Run Dc Unlocker in Admin Mode and Click on "Detect Modem"
- Install "FcSerialDrv" Drivers
- From Dc unlock Click on "Detect Modem" again
you will get information like this
Found Applications port COM58
Found modem : E8372
Model : Huawei E8372h
IMEI : 866280026583188
Serial NR. : R7EDU17327005367
Firmware : 21.316.01.04.274
Dashboard version : WEBUI_17.100.15.10.274_RE5
Web UI version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)
now READ "FRIMWARE VER" VERY CARE FULLY & DO AS I DESCRIBE FOR EACH MODEM & FIRMWRE VER. FOR THIS TUTORIAL I HAVE "21.316.01.04.274" SO I WILL DO AS PER THIS FIRMWARE.
- Disconnect Device from Usb & Attach TestPoint & Connect with PC Usb
- go to device manager and make sure there is only ONE COM PORT " Huawei Mobile Connect - 3G Pc Ui Interface (Com port Number)
- Open Inferno UniTool
- Go to Huawei
- Huawei Modem
- Erase
- Select Correct Model ( Select CAREFULLY, See Model Number from Device Sticker)
- Select Firmware ver ( See your Current Ver from Dc Unlocker )
- Write Correct Com Port In Inferno Software( See in Device Manager which port is used by "Huawei Mobile Connect - 3G Pc Ui Interface" )
- Click on Next
it will show like this
>>Current Task: HUAWEI>>Huawei Modem>>Erase
>>
>>Model: E8372H-608
>>Firmware Ver: 21.316.01.04.274
>>COMPort: 59
>>
Modem Files prepare Finished.
Erase Successfully!
Now See Device Manager there should be "2" Device in com ports tab
"Fc - Application Interface (Comport Number)"
"Fc - Pc UI Interface (Comport Number)"- Open INferno Unitool
- go to huawei
- Huawei Modem
- Patch Flash
- Select Correct Model ( Select CAREFULLY, See Model Number from Device Sticker)
- Select Firmware ver ( Select Ver which you Select for Erase )
- Write Correct Com Port ( See in Device Manager which port is used by "Fc - Pc UI Interface (Comport Number)" )
- Click on Next
it will show you like this
>>Current Task: HUAWEI>>Huawei Modem>>Patch Flash
>>
>>Model: E8372H-608
>>Firmware Ver: 21.316.01.04.274
>>COMPort: 58
>>
Modem Files prepare Finished.
Patch Flash Successfully!
- unplug Device & Connect it Again
- open Dc unlock and click no "Detect Modem"
it will show you like this
Found modem : E8372
Model : Huawei E8372h
IMEI : 000000000000000
Serial NR. : 0123456789ABCDEF
Firmware : 21.316.01.04.274
Compile date / time : Mar 17 2017 09:29:51
Hardware ver. : CL1E8372HM
Dashboard version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
your Device is Unlock now But need to Repair Imei
- now copy "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0" and past into Dc unlock log window.
- Replace All X with your imei number, command will be like this at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0
- now Press "Enter Button" from key board you will get reply like this,
at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0
at^nvwrex=0,0,16,8 6 6 6 7 6 7 8 7 6 5 5 4 7 6 0
OK- Click on "Detect Modem" From Dc unlocker again.
Selected Applications port COM58
Found modem : E8372
Model : Huawei E8372h
IMEI : 866676787655471
Serial NR. : 0123456789ABCDEF
Firmware : 21.316.01.04.274
Compile date / time : Mar 17 2017 09:29:51
Hardware ver. : CL1E8372HM
Dashboard version : WEBUI_17.100.15.10.274_RE5
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)
================================================== =================
Your Device is Unlocked With Original Imei & Original Branded WebUI
if you want to Unbrand WebUi then Flash WEbui only to universal one.
- Improtant Note:
- in Order to work with These Modem, You have to Download "HWModem.SYS" & add into Inferno Root.
- This is Beta it might have bugs so please report us.
- this is very 1st ver. we will make it more fancy & we will add more and more things about modems by very soon.
- Download Area Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/
__________________
Best Regards
GPGIndustries
المفضلات