أبحث عن فلاشة سامسونك i9060i mt6572 nand

[SARA2006]

السلام عليكم
أبحث عن فلاشة سامسونك i9060i mt6572 nand
هدا أنفو الجهاز
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
NAND: (4Gb+2048Mb) [SAMSUNG] KA100O015B_BJTT
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 2048 SpareSize: 64 BMT Blocks 80
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM84)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0x15e00000
[15]Part: CACHE Begin: 0x18dc0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x194c0000 Len: 0x6100000
[17]Part: BMTPOOL Begin: 0xffff0050 Len: 0x0
Offset: 0x1f400000 Count: 18
Error reading partition info.
IMEI[1]: 359444050044392
IMEI[2]: 359445050044399
Wait untill phone will start charging.
All done.

[MOHAMED*GSM]

اعمل باكب وتأكد منه
ومرر اندرويد ويوزرداتا
Nand Flash Code: 00EC00BC(00000055)
Nand Flash Size: 0x20000000 Hex Bytes
INT/EXT RAM Size: 0x20000/0x10000000
Reading Size: 0x21000000
Reading infr(Nand)...
PRELOADER BaseAddr:0x0 Size:0x100000
PRO_INFO BaseAddr:0x100000 Size:0x100000
NVRAM BaseAddr:0x200000 Size:0x300000
PROTECT_F BaseAddr:0x500000 Size:0x300000
PROTECT_S BaseAddr:0x800000 Size:0x300000
SECCFG BaseAddr:0xB00000 Size:0x40000
UBOOT BaseAddr:0xB40000 Size:0x80000
BOOTIMG BaseAddr:0xBC0000 Size:0x600000
RECOVERY BaseAddr:0x11C0000 Size:0x600000
SEC_RO BaseAddr:0x17C0000 Size:0x40000
MISC BaseAddr:0x1800000 Size:0xC0000
LOGO BaseAddr:0x18C0000 Size:0x100000
EXPDB BaseAddr:0x19C0000 Size:0x200000
FAT BaseAddr:0x1BC0000 Size:0x1400000
ANDROID BaseAddr:0x2FC0000 Size:0x15E00000
CACHE BaseAddr:0x18DC0000 Size:0x700000
USRDATA BaseAddr:0x194C0000 Size:0x6100000
BMTPOOL BaseAddr:0xFFFF0050 Size:0x0
>>Done

فلاشة جد جد نادرة لهاتف GT-I9060I MT6572

[SARA2006]

شكرا أخي الكريم.سأقوم بتحميل الفلاشة وسوف أرد عليك
شكرا جزيلا

[SARA2006]

أخي لم تعمل الفلاشة .لقد مات الجهاز.لقد مررت له ANDROID + USRDATA
شكرا أخي سوف أعيد تفليشه بالباكاب

[MOHAMED*GSM]

قبل ما تمرر الباكب
شو مشكلة الهاتف

[SARA2006]

الهاتف يقف على لوجو سامسونك

[MOHAMED*GSM]

تمام رجع من الباكب
يوزرداتا فقط وفلش اندرويد من
فلاشة رقم 6 من الموضوع دا

10 فلاشات GT-I9060&GT-I9082 لمعالج NAND فقط لعيون الجيم فلاش

ولو وجدت الفلاشة بصيغة bin
اعمل باكب اسكاتر ومررها كاملة
وبعد التفليش رجع الباكب كامل ما عدا اندرويد

[SARA2006]

الأنفو على CM2

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 83 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00EC00BC00000055005400EC00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008D , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID : 0xEBC49192BE081506469E1A4D469E9CAA
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done Erased/damaged phone?
You can change settings : Settings -> Other -> NAND init Mode

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

[SARA2006]

مشكور كتيرا أخي الفاضل