Welcome to Octoplus/Octopus Box Samsung software version 2.5.0
-----------------------------------------------------------------------------------
To connect SM-J510FN phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J700H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Performed by 2.5.0 Software version.
repair drk
Welcome to Octoplus/Octopus Box Samsung software version 2.5.0
-----------------------------------------------------------------------------------
To connect SM-J510FN phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J700H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Performed by 2.5.0 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM16
Selected model: SM-G925F
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
DRK fixing failed!
Performed by 2.5.0 Software version.
s 6 edge g925f عند التفليش خطا HIDDEN
.gif)
.gif)
المشاركة الأصلية كتبت بواسطة iphone_cpu
المفضلات