SM-J100H مشكله غريبه عند تمرير SM-J100h_J100HXCU0AOD4_ROM1
الانفو
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0700300B2D8069F5, ,FW Ver.: 01.58
CMD Pullup Level:2134 mV
CMD Active Level:2485 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473262110192B6B456527E
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 2461447254
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _2461447254_20170417_0140.extcsd
Done.
Processing file...C:\********s and Settings\Administrator\Desktop\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:2134 mV
CMD Active Level:2485 mV
Input file : C:\********s and Settings\Administrator\Desktop\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing 0040000000 bytes to 0000000000... ROM1 (USER ROM)
Write Block Failed, Reason: Write Block Verify Error
Done.
Done with error(s)
.gif)
المفضلات