Chinese Miracle-2 QLM/Qualcomm v1.02 - MSM8210, MSM8610, Nokia X2 and more

[MR.ROBOT]

Chinese Miracle-2 QLM/Qualcomm v1.02 - MSM8210, MSM8610, Nokia X2 and more!


Supported CPU types:

Qualcomm MSM 8210 (SnapDragon 200) NEW)
Qualcomm MSM 8610 (SnapDragon 200) NEW)
Qualcomm MSM 8909 (SnapDragon 210)
Qualcomm MSM 8916 (SnapDragon 410)

- MSM8916 loaders package updated, more types supported
More Alcatel,Lenovo and some others models are supported


- MSM8210 support activated!
Support wide range of generic MSM8210 phones
> Identify
> Read Firmware ( Infinity )
> Read Firmware ( Factory RAW )
> Write Firmware ( Infinity )
> Write Firmware ( Factory RAW )
> Read PatternLock ( Android 4.x/5.x )
> Format FileSystem
> Reset FRP ( Google Reset Protection )


- MSM8610 support activated!
Support wide range of generic MSM8610 phones
> Identify
> Read Firmware ( Infinity )
> Read Firmware ( Factory RAW )
> Write Firmware ( Infinity )
> Write Firmware ( Factory RAW )
> Read PatternLock ( Android 4.x/5.x )
> Format FileSystem
> Reset FRP ( Google Reset Protection )


- Read Firmware
Wide range of new types supported ( Generic and brand-specific )
More different security types will backup on "ExtraFiles" option enabled


CM2 Firmware NOT damage any device functionality ( Fota and etc )
CM2 Formware NOT damage any security settings in device


- Write Firmware
Improved Factory Firmware packages support (RAW)
Firmware verification improved
Improved MSM8916 flashing ( old type fw's )


- Format FS/Reset Settings
Reset FRP (Google Reset Protection ) improved ( vendor-specific types )


- Other
Stop button activated
Some other bugfixes and improvements
Nokia X2 support activated ( Read/Write/Format/Identify ) - just for fun


Index of pub/software/

[MR.ROBOT]

دعم معالج MSM8210

إنفو:

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 02730807
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!




Brand     : ZTE
ProdName  : cm_kis3
ProdModel : Kis 3
Device    : kis3
AndroidVer: 6.0.1
Manufact. : ZTE
QLMxCPU   : MSM8610


Done!
Elapsed: 00:00:06


Reconnect Power/Cable!

فورمات وإعادة ضبط المصنع

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 02730807
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!


Format USER ... 
Format CACHE ... 
Format Ok!


Done!
Elapsed: 00:00:23


Reconnect Power/Cable!

قراءة وكتابة الفلاش

Loading firmware ... Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand    : ZTE
Device Manufact.: ZTE
Device Model    : kis3
Device CPU      : MSM8610
Device IntName  : cm_kis3
Device Version  : 6.0.1
CU_SWVer        : ZTE
Device Compile  : 24.10.2016 16:31:29
Device ExtInfo  : Kis 3
Load Ok!


Operation : Flash [ v1.02 ]


Verify FW package ... 
Verification passed!


1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 02730807
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!


Files in Chain : 19
Flashing now


Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : userdata.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : splash.img
Flashing : gpt_backup0.bin


Flashing done!




Done!
Elapsed: 00:02:59


Reconnect Power/Cable!

Operation : Read Flash [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 02730807
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!




Brand     : ZTE
ProdName  : cm_kis3
ProdModel : Kis 3
Device    : kis3
AndroidVer: 6.0.1
Manufact. : ZTE
QLMxCPU   : MSM8610


DevInfo : MSM8610__ZTE__ZTE__ANDR_v6.0.1__Kis_3__kis3__cm_kis3


Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fs_gc.img
[Read Ok] : splash.img
[Read Ok] : gpt_backup0.bin


Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 558 MiB


Done!
Elapsed: 00:01:58


Reconnect Power/Cable!

[MR.ROBOT]

دعم معالج

MSM8610

مثال هاتف نوكيا X2 الأصلي

إنفو

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 01FE647B
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 189797909E83BB0C
ID_BLOCK_L : A9EB81EB51517B85
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!




Brand     : Nokia
AndroidVer: 4.3
Manufact. : Nokia
QLMxCPU   : MSM8610


Done!
Elapsed: 00:00:33

فورمات

Operation : Reset Settings [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 01FE647B
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 189797909E83BB0C
ID_BLOCK_L : A9EB81EB51517B85
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
 
Format USER ... 
Format CACHE ... 
Format Ok!
 
Done!
Elapsed: 00:00:28

قراءة وكتابة الفلاشة

Operation : Read Flash [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 01FE647B
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 189797909E83BB0C
ID_BLOCK_L : A9EB81EB51517B85
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!




Brand     : Nokia
AndroidVer: 4.3
Manufact. : Nokia
QLMxCPU   : MSM8610


DevInfo : MSM8610__Nokia__Nokia__ANDR_v4.3


Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : custom.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin


Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 912 MiB


Done!
Elapsed: 00:02:15


Reconnect Power/Cable!

Loading firmware ... Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand    : Nokia
Device Manufact.: Nokia
Device CPU      : MSM8610
Device Version  : 4.3
CU_SWVer        : Nokia
Device Compile  : 27.06.2014 11:52:37
Load Ok!


Operation : Flash [ v1.02 ]


Verify FW package ... 
Verification passed!


1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!


Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 01FE647B
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 189797909E83BB0C
ID_BLOCK_L : A9EB81EB51517B85
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!


Files in Chain : 21
Flashing now


Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : persist.img
Flashing : system.img
Flashing : cache.img
Flashing : recovery.img
Flashing : custom.img
Flashing : userdata.img
Flashing : gpt_backup0.bin


Flashing done!




Done!
Elapsed: 00:03:13

[الدرفيل]

تسلم ايدك مشكور على المتابعة

[HaMdY_gsm]

متابعه ممتازة

[‏ASEM DANIAL]

مشكور على المتابعة

[bero 2005]

متابعة ممتازة شكرا

[mohamed gasser]

مشكور وجزاك الله خير

[LYON]

تسلم حبيبي للمتابعة

[yasser_almaden]

مشكور وجزاك الله خير