فلاشة lg g3 MT6582

**karim1980** · 20-07-2016, 07:02 PM

الرجاء اخوتي طلب فلاشة فلاشة lg g3 MT6582 به فيروسات اباحية ،جربت cm2 و nckbox بلا فائدة ،كذلك جربت الفلاشتين الموجودتين في المنتدى و موقع needrom شاشة سوداء G3-Q520_HD_V109En20141216 و
المعلومات للفلاشة الاصلية
لوغ nckbox

كود:

 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM40)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (58Gb+8192Mb) TOSIBA 0x303038474530 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 11010030303847 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Not need to swith to high speed port, continue with this settings.
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP1.V2.10
 Version: 4.4.2
 Build Date: Tue Apr 21 17:19:59 CST 2015
 Build Date: 1429607999
 Model: G3
 Brand: alps
 Device: lcsh82_cwet_kk
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.10
 IMEI[1]: 354153062977482
 IMEI[2]: 358152801313252
 Wait untill phone will start charging.
 All done.

لوغ cm2

كود:

Operation : Check / Read Info [ v1.52 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 40 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303038474530010F0F64D791F1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG80
[eMMC] : FLASH_CID : 110100303038474530010F0F64D791F1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE7F513218A6A78F2C4947F2636BC8F45
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : lcsh82_cwet_kk
ProdModel : G3
Device    : lcsh82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.10

SECURITY : 
IMEI_SW [1] : 354153062977482
IMEI_SW [2] : 358152801313252
BTMAC Addr  : 4A4C46658241
WiFi MAC    : 000000000000

MODEM : 
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_P4_1_wg_n
Done!
Elapsed: 00:00:14
Reconnect Power/Cable!