المشاركة الأصلية كتبت بواسطة abdjamel
Samsung SM-J100H MT6….MP.V1.zip
لكن اخي الفلاشة المطلوبة هي SM-G530H MT657
الفلاشة تصلح للجهازين
شوف الانفو
info With Miracle Box:
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot11 ...
Nand Flash Type: Nand_NEW_006D
Nand Flash Code: 002C00BC(00900055)
Nand Flash Size: 0x20000000 Hex Bytes
INT/EXT RAM Size: 0x20000+0x10000000
Reading Size: 0x21000000
Reading infr(Nand)...
PRELOADER BaseAddr:0x0 Size:0x80000
PRO_INFO BaseAddr:0x80000 Size:0x100000
NVRAM BaseAddr:0x180000 Size:0x180000
PROTECT_F BaseAddr:0x300000 Size:0x180000
PROTECT_S BaseAddr:0x480000 Size:0x180000
SECCFG BaseAddr:0x600000 Size:0x20000
UBOOT BaseAddr:0x620000 Size:0x60000
BOOTIMG BaseAddr:0x680000 Size:0x600000
RECOVERY BaseAddr:0xC80000 Size:0x600000
SEC_RO BaseAddr:0x1280000 Size:0x40000
MISC BaseAddr:0x12C0000 Size:0x60000
LOGO BaseAddr:0x1320000 Size:0x100000
EXPDB BaseAddr:0x1420000 Size:0x200000
FAT BaseAddr:0x1620000 Size:0x1E00000
ANDROID BaseAddr:0x3420000 Size:0x14000000
CACHE BaseAddr:0x17420000 Size:0x700000
USRDATA BaseAddr:0x17B20000 Size:0x7AA0000
BMTPOOL BaseAddr:0xFFFF0050 Size:0x0
>>Done.
Info With Infinity CM2MTK:
Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0090 , [Micron] MT29C4G96MAZAPCJA_5IT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID : 228F3538D039E38642AA5A4A4D415918
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : samsung
ProdName : SM-G530F
ProdModel : SM-G530F
Device : SM-G530F
AndroidVer: 4.4.4
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
SECURITY :
IMEI_SW [1] : 355075052529818
IMEI_SW [2] : 355076052529816
BTMAC Addr : 000046657201
WiFi MAC : 000000000000
Reading Flash Content now ...
[Read Ok] : preloader_mbk72_wet_lca.bin
[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_lca / NAND
FW Size : 330 MiB
Brand : samsung
ProdName : SM-G530F
ProdModel : SM-G530F
Device : SM-G530F
AndroidVer: 4.4.4
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
Scatter saved to : MT6572_NAND_samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1
File Info:
This file included:
MT6572_160406115544 Scatter: File Readed With Miracle
MTK6572_1604061150.bin: File Readed With Miracle
MT6572_NAND_SM-G530F_4.4.4_ALPS.JB3.MP.V1: File Readed With CM2MTK
ضوابط المشاركة
رد مع اقتباس
المفضلات