طلب فلاشة htc desire 300

[m-mulham]

بعد نجاح اول تجربة في تفليش هاتف htc ومساعدة الاخوة الاكرام في هذا الموضوع
طلبات : طلب فلاشة HTC Desire 500 dual sim
قررت اشتري بوكسXTC2CLIP

واشتريت البوكس وجاني اليوم هاتف desire 300
وقراءة الهاتف
لكن تفاجات ان في السبورت لايوجد فلاشة لهذا الموديل
اجيبها منين

[HaMdY_gsm]

صديقي دخل الهاتف في وضع الفاست بوت واعمل انفو وارفع الانفو

[m-mulham]

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0002
(bootloader) version-baseband: 14.11.36Q4.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.10.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3CBWL00453
(bootloader) imei: 358280051827380
(bootloader) meid:
(bootloader) product: g3u
(bootloader) platform: HBOOT-8225
(bootloader) modelid: 0P6A10000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 3640mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e1c32097
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Execution time is 14(ms)
all: Done!
Reading secure flag information
... (bootloader) ¥eGHTCESet pmic_level Done! L13 2850
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [RADIO_ERR] SD init fail !!!
(bootloader) Wait for AMSS ready
Reading CID information
... (bootloader) cid: HTC__M27
Execution time is 14(ms)
OKAY
Reading MEID information
... (bootloader) meid: 000000000
Execution time is 15(ms)
OKAY
Read information completed.
ربنا يبارك فيك يا حمدي
بس سؤال حضرتك على اي سطر بتعتمد لتحديد الموديل والفلاشة

[m-mulham]

هل هذه الفلاشة المطابقة

[m-mulham]

فلاشتو بالفلاشة المحددة طلع خطا لماذا

[HaMdY_gsm]

اعمل s-off وغير cid الي 11111111

هيقبل معاك تفليش

[GhAzwAn Eid]

اعتمد على كلمة Product:3g_u
نصيحة اخي بما انه عندك البوكس ليش ما بتعمل S-off
يمكن يكون اصدار الفلاشة اقدم من الاصدار اللي عندك او ال Cid غير متوافق اعمله سوبر 11111111

[m-mulham]

شكرا لكم ساجرب واوافيكم بالنتيجة

[m-mulham]

عند عمل اس اوف يبقى واقف على هذه الكلمة