قريبا __ Chinese Miracle-2 SPD/Spreadtrum v1.11
NAND SC77xx phones to test FW reading
No Root
No ADB
No power on phone need
Read FW
كود PHP:Operation : Read FullFlash [ v1.11 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 90 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img
Firmware Size : 276 MiB
Saved to : E:\SPD\FW\SC77xx_ANDROID_NAND_b256k\
Done!
Elapsed: 00:05:37
Reconnect Power/Cable!
Flash FW :
كود PHP:Infinity SC Firmware DetectedFW Size : 276 MiB
Load Ok!
Operation : Flash [ v1.11 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 90 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Write Data ...
Write Data Ok!
Write FSImage : prodnv_b256k.img
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc7715_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Write CodeData : sc7715_modem_sc7715_cp2.bin
Write Data ...
Write Data Ok!
Write CodeData : logo_320x480.bin
Write Data ...
Write Data Ok!
Write CodeData : fblogo_320x480.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system_b256k.img
Write Data ...
Write Data Ok!
Write FSImage : cache_b256k.img
Write Data ...
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Write FSImage : userdata_b256k.img
Write Data ...
Write Data Ok!
Elapsed: 00:01:24
Reconnect Power/Cable!Real and FULL FW
- Real and FULL FW
- Allow Repair phone FROM ANY state ( erased/wrong flashed/change ic )
- Allow Read CORRECT and FULL FIRMWARE for phones, which has DUAL TYPE flash IC's ( 128k and 256k - you should have/select CORRECT type for your phone )
- No Root , USB Debug and etc - just press button and get result.
- Support ALL SC77xx Concept NAND phones.
المفضلات