الجهاز طفي لوحده عملت له سوفت وهذه القراءة ارجو المساعدة بايجاد الحل ولكم جزيل الشكر .مع العلم اني سخنت على المعالج وايسي البور ونفس المشكلة
card found: A1B5CCE8
registered to: CycloneBox


Connect phone on selected interface...


Checking SL version now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
Try again...
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm


Phone not connected...
?


Phone not connected...
?


Phone not connected...
?


Phone not connected...
?


Phone not connected...
?


Core : v1.51 , FlashEngine : v1.8


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...


Files Set for Flashing :
MCU : rm766__07.42.mcusw
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...


-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---


Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates


Reading CCC
Reading HWC
Reading NPC


IMEI 1 : 356344052687961
IMEI 2 : 356344052687979
PCcode : -ROÒVÌ


NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : C:\Program Files\nokia best 1.80\Backup\Cert\356344052687961_356344052687979_2nd_XG213_CRT.rpl




===Flashing [MCU]===
File : rm766__07.42.mcusw
Image : rm766__07.42.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x000C0000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x000C0000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40120000 , Len : 0x01AE0000
Erasing, wait ...
Erase done, time : 00:01:32
Write , Start : 0x40120000 , Len : 0x01AC4000
Flashing , wait ...
Region flash done, time : 00:00:46
Processing Region 5/5
Erase , Start : 0x43EE0000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip


Flashing done!
Total flash time : 00:02:25
Reboot phone now...


User INI update - Ok


-------AFTER FLASH BREAKED BY USER-------


- > AfterFlash Failed! Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy


Connect phone on selected interface...


Done!
Connect phone on selected interface...




Elapsed: 00:04:33
Connect phone on selected interface...