مشكلة contact retailer بعد التفليش

[ProfKefah]

السلام عليكم جاني هاتف
C5 rm-645
يعمل قمت بتفليشه الى الاصدار 71 عربي
تم اتلتفليش لكن الهاتف اشتغل وبمشكلة contact retailer

هذا هو سجل البرنامج

Connect phone on selected interface...

Read Uniq key data started...


Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID:     16800019ADDE03441B74A23B4F51594D081A5DC4
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
Fetching data, wait...


 - > Reinsert cable and battery, press powerOn button again
 - > For X7, E7 - just waiting, near 1 minute
 - > When BEST start Search Phone - Press PowerOn if needed


Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     16800019ADDE03441B74A23B4F51594D081A5DC4
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot


Wait, reconneting...


rap= 16800019ADDE03441B74A23B4F51594D081A5DC4
hash= 916F75217F32081248B15C38DFC8E81B
key= 6636CC0B9CA6483C17BDA506B6EA30BF1DFCECB5


Key file updated...


Done!


Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info...  - Ok


Checking StartUp data ...
-----------------------


IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL




SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 


CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok


Security status : Security Damaged!!!!! :(
 - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )


-----------------------


PA_SimLock Version : 
PA_SL phone detected


Done!


Repair SL procedure started...


Phone Imei: 12345610654321?
Key file exists, no need to read...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing SimLock Data...   Error
Repair fail...! ( SL3 phone? )


Using : RM-645.pp
Operating mode is OK, no need change...


Write 50 element(s)...
Writen : 50 elements
Done!


Elapsed: 00:00:00


Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info...  - Ok


Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     16800019ADDE03441B74A23B4F51594D081A5DC4
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: Reading certificates...


Reading NPC certificate...
IMEI : 352421051130575
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot


NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : C:\InfinityBox\BEST\Backup\Cert\352421051130575_CRT_2nd.rpl


All done, Disconnecting


Elapsed: 00:00:05
Connect phone on selected interface...




Phone found!
Series 60 Device detected!
read info...  - Ok


Reboot....
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     16800019ADDE03441B74A23B4F51594D081A5DC4
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode


Reading NPC certificate...
IMEI : 352421051130575
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : C:\InfinityBox\BEST\Backup\Cert\352421051130575_CRT_2nd.rpl


Trying read spr block , wait ...
Get phone data...
Get flash data...
SPR Read Ok!
Spr saved to : 352421051130575.spr


ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot


Processing SimLock extraction....
Checking readed data, wait few seconds
ID_INFO : ICPR82_11w16.3.14/16-11-12/RM-745
#1st block Ok [SLT]
#2nd block Ok [SHA]
#3rd block Ok [SIG]
Initial data found, start fun...
SimLock RPL saved : c:\InfinityBox\BEST\Backup\Cert\352421051130575_SIM.rpl
SimLock PM  saved : c:\InfinityBox\BEST\Backup\Cert\352421051130575_SIM.pm
Done!


Elapsed: 00:00:28


Phone disconected!


Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info...  - Ok


Phone disconected!


Connect phone on selected interface...

[ProfKefah]

التفليش مرة اخرى بنفس كود الهاتف

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...


Files Set for Flashing :
MCU : rm645_071.005_prd.core.fpsx
PPM : rm645_071.005_13.01_APAC1_prd.rofs2.fpsx
PPM2 : rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_071.005_U062.000_prd.uda.fpsx
APE : RM645_ENO_10wk48v0.001.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 16800019ADDE03441B74A23B4F51594D081A5DC4
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode


Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352421051130575
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : C:\InfinityBox\BEST\Backup\Cert\352421051130575_CRT_2nd.rpl




=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===


===Flashing [MCU]===
Erase : Processing rm645_071.005_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm645_071.005_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 411 blocks
TIME : Write time : 00:00:13
MCU Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000


===Flashing [PPM]===
Erase : Processing rm645_071.005_13.01_APAC1_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_13.01_APAC1_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 161 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000


===Flashing [PPM2]===
Erase : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000


===Flashing [CNT]===
Erase : Processing rm645_071.005_U062.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm645_071.005_U062.000_prd.uda.fpsx
Total writen 24 blocks
TIME : Write time : 00:00:01
CNT Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000


===Flashing [APE]===
Erase : Processing RM645_ENO_10wk48v0.001.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM645_ENO_10wk48v0.001.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 10 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000


ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot


Flashing done!
Total flash time : 00:00:25
Reboot phone now...


Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI: 12345610654321?
Ape Version: 071.005
Product code: 0593731
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Battery voltage is enough for start
Set phone to Normal mode...


AfterFlash operations done ;D
Done!


Elapsed: 00:01:05
Connect phone on selected interface...

[hamada yousri]

ما هى حالة الجهاز قبل التفليش

IMEI Validation : IMEI Damaged!!!! - > SIMLOCK , SECURITY Info can be wrong! - > Need restore NPC backup or RPL SDD Key status : SDData Damaged!!!!! :( - > Do REPAIR SDD , Local SX4 if needed CMLA Key status : CMLA key Not exist SimLock status : SimLock is Ok Security status : Security Damaged!!!!! :( - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

[Abu Tata]

IMEI: 12345610654321?

الجهاز ضارب سريال
لو عندك بيكيب الجهاز قبل مايضرب رجعهوله
لو مش موجود هضطر انك تغير طقم برسسور وفلاش مع بعض قطعتين فوق بعض

[ProfKefah]

لا يوجد عندي اي باكب

[ProfKefah]

ما هى حالة الجهاز قبل التفليش

IMEI Validation : IMEI Damaged!!!! - > SIMLOCK , SECURITY Info can be wrong! - > Need restore NPC backup or RPL SDD Key status : SDData Damaged!!!!! :( - > Do REPAIR SDD , Local SX4 if needed CMLA Key status : CMLA key Not exist SimLock status : SimLock is Ok Security status : Security Damaged!!!!! :( - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

عليه رمز حماية

[seakrokram]

عليه رمز حماية

ابحث عن الباكب في مجلد البوكس وقم بكتابته للجهاز
لان البوكس بيعمل باكب قبل التفليش

[ProfKefah]

حللت المشكلة بعد عناء طويل
وكالاتي
الهاتف حسب الملصق هو c5 rm 645
فجربت فلاشة rm 745 c5
بعدها عملت erase rpl
ثم عملت نسخة rpl من هاتف اخر يعمل
والحمدلله حللت المشكلة
جزا الله كل الخير كل من ساعدني

[Abu Tata]

مبروك اصلاح العطل اولا
بس اسف كلامك غير صحيح بخصوص نسخه rpl من جهاز تاني

حللت المشكلة بعد عناء طويل
وكالاتي
الهاتف حسب الملصق هو c5 rm 645
فجربت فلاشة rm 745 c5
بعدها عملت erase rpl
ثم عملت نسخة rpl من هاتف اخر يعمل
والحمدلله حللت المشكلة
جزا الله كل الخير كل من ساعدني

[ProfKefah]

مبروك اصلاح العطل اولا
بس اسف كلامك غير صحيح بخصوص نسخه rpl من جهاز تاني

ممكن توضح كلامك