Connect phone on selected interface...


Core : v2.12 , BB5XG FlashEngine : v9.9


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...


Files Set for Flashing :
MCU : 0DD18E3C_rm837__03.51.mcusw
PPM : 1E99BB62_rm837__03.51.ppm_e5
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...


-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---


Connection opened successfully


IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF


Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.50_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!


Check keys...
Check done. Image can be flashed


Backup enabled, will read all certificates


Reading CCC
Reading HWC
Reading NPC


IMEI 1 : 357253052617002
IMEI 2 : 357253052617010
PCcode : 059P7C5


NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : C:\InfinityBox\BEST\Backup\Cert\357253052617002_2nd_XG213_CRT.rpl


Settings : EDM [0x8] , Block Mode , Fast CRC , Verify


===Flashing [MCU]===
File : 0DD18E3C_rm837__03.51.mcusw
Image : rm837__03.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
[ERR_hReqFlashEraseStart] : 8201410040000000
Error...
-> Check cable, flashfile, try again from this file


Connect phone on selected interface...




Elapsed: 00:00:14
Connect phone on selected interface...