مشكله كونتكت سيرفس

[احمد الكناني]

السلام عليكم

كيف الحال


اخواني الكرام جهاز 225 نوكيا كان في رمز عملت له فورمات لالغاء الرمز


ظهرت لي مشكله كونتكت سيرفس بعد الفورمات في بدايه التشغيل عملت له فلاشه ونفس المشكله


هذا لوج التفليش والفورمات

card found: S/N 4C4A:0118
registered to: alknany


Connect phone on selected interface...


Core : v2.01 , MTKx FlashEngine : v6.8


Verify files ...
MAUI : RM-1011_ROM_eMP_20.10.11
VIVA : RM-1011_VIVA_eMP_20.10.11
LANG : RM-1011_LANG_PACK_ROM_IC_eMP_20.10.11_002
CUST : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_20.10.11_002
JMPT : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_20.10.11_002
- > MODE : FullFlash


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!


--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 14 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 44FEE6C6E571D00F38ED254F0DEDBF28
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_20.10.11
SecureDecrypt : RM-1011_VIVA_eMP_20.10.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IC_eMP_20.10.11_002
SecureDecrypt : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_20.10.11_002
SecureDecrypt : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_20.10.11_002
OVRLP : 000069B900000001
PHPID : PEARL.20.10.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_20.10.11
Write : RM-1011_LANG_PACK_ROM_IC_eMP_20.10.11_002
Write : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_20.10.11_002
Write : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_20.10.11_002
Write : RM-1011_VIVA_eMP_20.10.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_20.10.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IC_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IC_MEA_SY_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_JUMP_TABLE_IC_MEA_SY_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_VIVA_eMP_20.10.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now


Flashing done!
Total flash time : 00:02:52
Reboot phone Ok


- > Hint : If phone shows Battery charge icon - press and hold PowerOn button 10 seconds


- > AfterFlash Not Done! Reason : Driver/Connection fault or HW Error
Re-insert battery and PowerUp phone manualy


Connect phone on selected interface...






Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!


--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 14 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 44FEE6C6E571D00F38ED254F0DEDBF28
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE


Connect phone on selected interface...


ممكن حل وشكرا للدخول الكرام

[HosaaM HasheM]

اخي مبدئيا حاول تفلش الجهاز بفلاشة تحميل نفس البرودكت اولا

[احمد الكناني]

اخي مبدئيا حاول تفلش الجهاز بفلاشة تحميل نفس البرودكت اولا

اخي الكريم اشكر مرورك الجميل نفس الحاله

[allttar]

تم الحل : حل مشكلة موتnokia 220 اثناء التفليش