Repair IMEI i9300
الكابل المستعمل ( UART R 523K )
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: GT-I9300
Hardware: SMDK4X12
Mode: normal
Checking environment ...
System Info
Display ID: JZO54K
System Ver: 4.1.2 REL
API Level: 16
Incremental: I9300ZSEMA1
Model: GT-I9300
Brand: samsung
Device: m0
Platform: exynos4
Language: en
Rigion: GB
Device Info
SerialNumber: 4d19ff24774a5e39
Hardware: smdk4x12
Model: m0
PDA Version: I9300ZSEMA1
Phone Version: I9300XXELLA
Bootloader ver: I9300ZSEMA1
Ril HW ID:REV__
Sales Code: TGY
Model ID: I9300
Get Bluetooth info failed
Get WI-FI info failed
Network [1]: GSM IMEI: 004999010640000
Root Access: ROOTED
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
Connect to device ...
Device Authentication ...
Writing IMEI ... ok, You need reboot device
Time used : 0.9 s
Repair IMEI i9100الكابل المستعمل usb
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model:
Hardware:
Mode: DOWNLOAD
Detect 1 USB devices not install driver
Connect to device ...
Repair EFS ...
Flash completed
Time used : 10.0 s
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
Time used : 0.0 s
Restarting ADB service ... ok
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: GT-I9100
Hardware: SMDKC210
Mode: normal
Detect 1 USB devices not install driver
Checking environment ...
System Info
Display ID: GINGERBREAD
System Ver: 2.3.5 REL
API Level: 10
Incremental: JPKJ2
Model: GT-I9100
Brand: samsung
Device: GT-I9100
Platform: s5pc210
Language: ar
Rigion: AE
Device Info
SerialNumber:
Hardware: smdkc210
Model: GT-I9100
PDA Version: I9100JPKJ2
Phone Version: I9100XXKI4
Bootloader ver: UNKNOWN
Ril HW ID:MP 1.400
Sales Code: XSG
Model ID: I9100
Bluetooth addr: 6491:C2:CA:D8
Get WI-FI info failed
Network [1]: GSM IMEI: 004999010640000
Root Access: No root
Time used : 3.0 s
Connect to device ...
Device Authentication ... 1 failed with MSL
Prepare environment ... need root access
Start Get Root ... will try 6 methods
Root with psneuter ... failed
Root with root1 ... failed
Root with exynos-abuse ... failed
Root with root2 ... ok
Please get temporary root first.
Bypass MSL ...
Update device ...
Reboot device to NORMAL mode ...
Wait device ready ...
1 failed with MSL
Time used : 1 min 37 s
Connect to device ...
Device Authentication ...
Writing IMEI ... ok, You need reboot device
Time used : 4.3 s
PL2303 : 3.4.36.247 2012-07-26
Best Smart Tools, Load OK.
Turn OFF device and connect ...
Sending Loader ...
Device Information
Chip Model : MT6575
Chip Name : MT6575_S01
Hardware code : 6575
Secure Ver : 05
Chip BL Ver : 00
EMMC ID : 504e01fe-34354a31-28051241-9b319901
EMMC UA size : e9800000
Boot1 Size : 00100000
Boot2 Size : 00100000
RPMB Size : 00100000
Internal Ram : 00020000
Turn OFF device and connect ...
Start unlock ... push file failedTurn OFF device and connect ...
Start unlock ... push file failedTurn OFF device and connect ...
Sending Loader ...
Looking for data ...
Reading data ... done
Saving backup file to "D:\BST\backup\MTK\MT6575\MT6575_BOOT_2015-10-11_10.56.03.bin"
Writing data ... done
Turn on device and install driver ... timeout
Turn OFF device and connect ...
Sending Loader ...
Looking for data ...
Reading data ... done
Saving backup file to "D:\BST\backup\MTK\MT6575\MT6575_BOOT_2015-10-11_10.58.59.bin"
Writing data ... done
Turn on device and install driver ...
Start unlock ... ok
Device Information
Chip Model : MT6572
Chip Name : MT6572_S00
Hardware code : 6572
Secure Ver : ff
Chip BL Ver : 01
NAND Flash ID : 0084
NAND FlashSize: 20000000
Page Size : 1000
Internal Ram : 00020000
Ext. Ram Type : HW_RAM_DRAM
Ext. Ram Size : 10000000
Turn OFF device and connect ...
Start unlock ... push file failedTurn on device and connect with USB cable ...
Stopping current operation ...
Exception happended : operation stopped by user
Turn OFF device and connect ... can't detect device
Turn OFF device and connect ...
Sending Loader ...
Looking for data ...
Reading data ... done
Saving backup file to "D:\BST\backup\MTK\MT6572\MT6572_BOOT_2015-10-29_12.27.51.bin"
Writing data ... done
Turn on device and install driver ...
Start unlock ... push file failedTurn OFF device and connect ... can't detect device
Turn OFF device and connect ...
Sending Loader ...
Looking for data ...
Reading data ... done
Saving backup file to "D:\BST\backup\MTK\MT6572\MT6572_BOOT_2015-10-29_12.30.53.bin"
Writing data ... done
Turn on device and install driver ...
Start unlock ... ok
المفضلات