-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 354603055098001
IMEI 2 : 354603055098019
PCcode : 059P7W2

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\354603055098001_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm766__07.42.mcusw
Image : rm766__07.42.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x000C0000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40060000 , Len : 0x000C0000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40120000 , Len : 0x01AE0000
Erasing, wait ...
Erase done, time : 00:00:54
Write , Start : 0x40120000 , Len : 0x01AC4000
Flashing , wait ...
Region flash done, time : 00:00:38
Processing Region 5/5
Erase , Start : 0x43EE0000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x9E48

===Flashing [PPM]===
File : rm766__07.42.ppm_maa
Image : package_maa.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00800000
Erasing, wait ...
Erase done, time : 00:00:12
Write , Start : 0x41C00000 , Len : 0x005C18A0
Flashing , wait ...
Region flash done, time : 00:00:07
CRC check passed , 0xC270

===Flashing [CNT]===
File : rm766__07.42.image_maa_059L1G8
Image : package_maa_059L1G8.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42400000 , Len : 0x01AE0000
Erasing, wait ...
Erase done, time : 00:01:02
Write , Start : 0x42400000 , Len : 0x00E20000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43F00000 , Len : 0x00080000
Erasing, wait ...
Erase done, time : 00:00:01
No write data, skip
CRC check passed , 0x6448

Flashing done!
Total flash time : 00:03:17
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 305
Software Info: V 07.42 07-05-13 RM-766 (c) Nokia
IMEI: 354603055098001
PPM version : V 07.42 07-05-13 RM-766 (c) Nokia MAA
Product code: 059P7W2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:05
Connect phone on selected interface...

Will Write CCC/HWC keys now...

No any file selected, break operation

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom

Boot error #1, break

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom

Boot error #1, break

Phone not connected...
Connect phone and try again...

Phone not connected...
Connect phone and try again...

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom

Fetching failed!

Connect phone on selected interface...

Read fail...!

Connect phone on selected interface...

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom

Fetching failed!

Connect phone on selected interface...

Read fail...!

Connect phone on selected interface...

Will Write CCC/HWC keys now...

No any file selected, break operation

Connect phone on selected interface...

Core : v1.98 , BB5XG FlashEngine : v9.9

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm766__07.42.mcusw
PPM : rm766__07.42.ppm_maa
CNT : rm766__07.42.image_maa_059L1G8
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---


-------BOOT BREAKED BY USER-------

-> Phone not found..

Elapsed: 00:00:05
Connect phone on selected interface...

Core : v1.98 , BB5XG FlashEngine : v9.9

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm766__07.42.mcusw
PPM : rm766__07.42.ppm_maa
CNT : rm766__07.42.image_maa_059L1G8
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 354603055098001
IMEI 2 : 354603055098019
PCcode : 059P7W2

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\354603055098001_2nd_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm766__07.42.mcusw
Image : rm766__07.42.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x000C0000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40060000 , Len : 0x000C0000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40120000 , Len : 0x01AE0000
Erasing, wait ...
Erase done, time : 00:00:54
Write , Start : 0x40120000 , Len : 0x01AC4000
Flashing , wait ...
Region flash done, time : 00:00:37
Processing Region 5/5
Erase , Start : 0x43EE0000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x9E48

===Flashing [PPM]===
File : rm766__07.42.ppm_maa
Image : package_maa.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00800000
Erasing, wait ...
Erase done, time : 00:00:12
Write , Start : 0x41C00000 , Len : 0x005C18A0
Flashing , wait ...
Region flash done, time : 00:00:07
CRC check passed , 0xC270

===Flashing [CNT]===
File : rm766__07.42.image_maa_059L1G8
Image : package_maa_059L1G8.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42400000 , Len : 0x01AE0000
Erasing, wait ...
Erase done, time : 00:01:02
Write , Start : 0x42400000 , Len : 0x00E20000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43F00000 , Len : 0x00080000
Erasing, wait ...
Erase done, time : 00:00:01
No write data, skip
CRC check passed , 0x6448

Flashing done!
Total flash time : 00:03:16
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 305
Software Info: V 07.42 07-05-13 RM-766 (c) Nokia
IMEI: 354603055098001
PPM version : V 07.42 07-05-13 RM-766 (c) Nokia MAA
Product code: 059L1G8
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...