نوكيا 101 الجهاز فاصل تم التسخين على ic الباور شيك

[atta_mahmoud]

الجهاز فاصل تم التسخين على ic الباور شيك على التربو وتم عمل سوفت ولكنة لا يفتح بعدها
وهذا التشيك بعد السوفت على التربو



Library Version : 00030207
Box Type : ATF Nitro
Box Firmware : LogiCore 11.0.00
Software Version : v11.00
AdvanceBox SN : DFA85AAF8633117FA664317F
Box Status : ACTIVATED
================================================
Box Successfully Initialized
================================================

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

MCU: V 07.70 18-10-12 RM-769 (c) Nokia
IMEI: 358975052983021
Product Serial Number: 3E67D77BH
Product Code : 059G7N2
Module Code : 0204883
Basic Production Code: 059R3M2
PPM SW Version : V 07.70 18-10-12 RM-769 (c) Nokia IC
ADSP Version : p V 07.70\n18-10-12\nRM-769\n(c) NMP\nic
MCU SW Version : V 07.70 18-10-12 RM-769 (c) Nokia
HW Version : 1001
UEM Version : 1328
UPP Version : 8850
LCD Version : UNKWN: IDs: 00:00:00
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : FAILED

Phone Cannot Enter Normal Mode if LCD
is Damaged or LCD is not Properly
Connected to the Main PCB


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...
No Flash Files Selected to Check...

[AhMEd TOhAMY]

تم النقل الى قسم الصيانه للمتابعه معاك بشكل افضل

[MHASEB ABO NOUR]

ST_LCD_TEST : FAILED