s3802wممكن مساعدة في قفل البطاقة

[وكالي سليم]

تم تفليش الهاتف لكن كود الحماية لم ينزع
علي الزاد3
Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 00B100EC
Reading security... error
Done with Samsung Tool v.17.3

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 00B100EC
Reading security... error
Done with Samsung Tool v.17.3

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Searching Samsung modem... not found
Done with Samsung Tool v.17.3

[HosaaM HasheM]

Searching Samsung modem... not found

لازم توصل الجهاز و تشغلو بعد التفليش

و يقرا معاك على الجهاز

[وكالي سليم]

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 00B100EC
Erasing flash... OK
Sending BIN/BSY (psi.fls)... OK
Erasing flash... OK
Sending BIN/BSY (slb.fls)... OK
Erasing flash... OK
Sending BIN/BSY (CATFISH2250_PRE.fls)... OK
Erasing flash... OK
Sending BIN/BSY (CATFISH2250_PAGING.fls)... OK
Erasing flash... OK
Sending CDS (CATFISH2250.fls)... OK
Erasing flash... OK
Sending CUST (GT-S3802_OJP_CUST.dfat)... OK
Erasing flash... OK
Sending ROOT (GT-S3802_OJP_ROOT.dfat)... OK
Erasing flash... OK
Sending USER (GT-S3802_OJP_USER.dfat)... OK
Flashing done (time - 00:03:50)
Done with Samsung Tool v.17.7

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Connect phone in flash mode
Waiting phone... timeout
Done with Samsung Tool v.17.7

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 00B100EC
Reading security... error
Done with Samsung Tool v.17.7

Selected model: S3802W
Selected port: COM7 Z3X BOX Serial Port
Selected port speed: 921600
Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 00B100EC
Reading security... error
Done with Samsung Tool v.17.7


Done with Samsung Tool v.17.7

[وكالي سليم]

Reading security... error

[وكالي سليم]

انا استعمل فلاش عربي

[وكالي سليم]

انا استعمل فلاش عربي
جاري المحاولة

[وكالي سليم]

بارك الله فيك جاري التجريب

[HosaaM HasheM]

وصلو واعمل انفو على طول

[HosaaM HasheM]

اخي اختار جهاز s5222

و اعد المحاولة

و يفضل تشتغل بكابل rj

و دي احدى المحاولات الناجحة

تابع و انا معاك

Selected model: S5222
Selected com port: COM9
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Phone IMEI: 35543305044065/00
Phone SN: RZ1D23ESLA
Phone SN: S3802DDMB2
Phone user code: 15111988
Read user code - ok
Elapsed time: 5 second, sw ver: 3.5.0040

[وكالي سليم]

Selected model: S5222
Selected com port: COM7
Selected speed port: 921600
Attention !!! Use this operation after flashing phone
Search diag port...
Timeout
Read info - fail
Elapsed time: 92 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
Selected model: S5222
Selected com port: COM7
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Timeout
Read user code - fail
Elapsed time: 32 second, sw ver: 3.5.0040
----------------------------------------