فلاش باصدار مختلف ونفس المشكلة قائمة
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 8804 - 23280001 [ST 58LR128U,128 Mbits]
CFI information:
Flash settings: 0/64, size: 0x01000000
2 Block regions:
127 x 0x00020000 = 0x00FE0000
4 x 0x00008000 = 0x00020000
EBL ready !
Processing file: rm961_02.900
Downloading item CODE:hw_b1_rm961_02.900.fls, num block: 3, size: 5.58 MB
Erasing area 0x00000000-0x00005FFE ...OK
Programming completed in 0.593 s
Erasing area 0x00800000-0x00BEFFFE ...OK
Programming completed in 1 min 19.906 s
Erasing area 0x00C5D000-0x00DFB6FE ...OK
Programming completed in 29.797 s
Checksum verified (0x552F)
Processing file: rm961_02.90mg
Downloading item CUST:hw_b1_rm961_02.90mg.fls, num block: 1, size: 5.45 MB
Erasing area 0x00100000-0x0067183E ...OK
Programming completed in 1 min 41.594 s
Checksum verified (0x1E70)
Processing file: rm961_nai02.90mg
Downloading item CODE:hw_b1_rm961_nai02.90mg.fls, num block: 1, size: 1022.77 KB
Erasing area 0x00E60000-0x00F5EDFE ...OK
Programming completed in 19.828 s
Checksum verified (0x5DF2)
Total time for flashing process(boot+erase+write) was 6 min 3.438 s


Phone type: RM-961
SW version: V 02.90 22-10-13 RM-961 (c) Nokia
Imei plain: 35999305778532-4
Product code: 059T2B9
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MG
Language Pack:
- not available.

Master code: 3203503356

Imei net: 35999305778532
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000040002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN