عن تجربة مع هاتف ليومين


Nowadays there are some B3410 with new Flash Chips become dead after flash because neither Original B3410 Flasher nor Z3X support its flashing how to know if it is new chip? When you Flash with HWK it can not be flashed it shows that it is new Flash Chip and HWK doesn't support its Flashing here is the Solution for it :


1- As I mentioned it is not supported with Z3X when you flash it will failed in TFS format so you have to flash it by Selecting B3410N model via USB cable but B3410 files should be selected and choose flash mode from settings.
How connect it through USB ? Just Press on Firmware and Connect the phone by keeping pressed 5+8 or 3+6 keys together without battery .Phone will completely Flash but dead don't worry .

2- Now Change the Model to B3410 and Erase EEP

3- Flash with only .Cal file doesn't matter to flash with B3410 by Rj or with B3410N via USB phone will turn on with IMEI 000000

4- Fill the IMEI Tab and select flash mode from setting and Repair IMEI by clicking on Custom

Your phone is now completely repaired I have tested with 2 phones .As I searched many user are in trouble with it flashing I hope it will help all.

P.S don't write any Eeprom because it wont help


ادا اعطى ارقام 18000002


hello. i searched for this problem many users asked for solution
here is my solution.
download file B3410JVJJ1.rar - 4shared.com - online file sharing and storage - download -
use Z3x, select b3410n as model
flash by usb (hold 3+6 connect cable)




http://forum.gsmhosting.com/vbb/f200/b3410-tfs-failed-18000002-solution-here-1491456/