n900
قومت بتفليش نوكيا n900 لكن الهاتف لم يشتغل
Core : v1.78 , Tablet FlashEngine : v4.5
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2101
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0
Device mode : Production mode
==========
FW APE version : 20.2010.36-2
FW PRx release : PR_1.3
FW Region info : GLOBAL
FW Region ver : MR0
==========
Read info Ok
=== SW version Check ====
Skipped!!! Reason : empty initial data ( IF YOU FLASH eMMC ONLY - SKIP this!)
=== SW version Check ====
---Processing MCU image---
Processing NOL part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_20.2010.36-2_PR_MR0
RootFs flash Ok
Processing CMT part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok
Switch : OSSO UART+USB
Version : RX-51_2009SE_20.2010.36-2_PR_MR0
Switch CMT request Ok
CMT : Erasing...
CMT : Program...
CMT : Program Finished!
Executing PostFlash : Reset RD Flags
Executing PostFlash : Reboot
Done!
Elapsed: 00:01:59
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
رد مع اقتباس
المشاركة الأصلية كتبت بواسطة asat-gem
المفضلات