المشاركة الأصلية كتبت بواسطة حسن حسني
قمت بتحميل الفلاشة
DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin
كود PHP:
Check : Processing DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin
==========
FW APE version : 40.2012.21-3.454.6
FW CMT version : 9.2.2011.51
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 454
KERNEL version : 2.6.32-20121301+0m8
==========
Check : File Is Ok !
Core : v1.78 , Tablet FlashEngine : v4.5
Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RM-696 , HWRev : 1502
NOLO : 01/06/23
SWVer: DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
Device mode : Production mode
==========
FW APE version : 40.2012.21-3.454.6
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 454
==========
Read info Ok
=== SW version Check ====
Ok [Reflashing or Upgrade]
=== SW version Check ====
Processing APE Boot...
File : DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin
Processing : ape-algo
APE Algorithm boot Ok
Reopening the connection...
MKII mode init Ok
Device : RM-696
HW build : 1502
Bat.level : 26
SW release : (empty)
Protocol : 108
UPDAPP ver : 1.7.2
Upd/Dev PT : 3 , 3
FL_images : cert-sw,xloader,secondary,rootfs,kernel,moslo,config,mmc,tar,cmt-2nd,cmt-algo,cmt-mcusw
Last errors : bb5_rdc_cert_read failed
Code Match Ok
HW match Ok
MKII Set : Host Protocol set to 108
MKII Set : CMT Verify On
MKII Set : Perform RFS On
MKII Set : eMMC preserve On
---Processing MCU image---
Processing File : DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin
MKII : Sending config for [cert-sw]
-> Ver T : RM-696
-> Ver H : 1501 , 1502
MKII : Init pipe 00
MKII : Flashing...
MKII : Finalizing...
cert-sw Flash done
MKII : Sending config for [kernel]
-> Ver I : 2.6.32-20121301+0m8
MKII : Init pipe 01
MKII : Flashing...
MKII : Finalizing...
kernel Flash done
MKII : Sending config for [rootfs]
-> Ver I : DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
MKII : Init pipe 02
MKII : Flashing...
MKII : Finalizing...
rootfs Flash done
MKII : Sending config for [cmt-2nd]
-> Ver T : RM-696
MKII : Init pipe 03
MKII : Flashing...
MKII : Finalizing...
cmt-2nd Flash done
MKII : Sending config for [cmt-algo]
-> Ver T : RM-696
MKII : Init pipe 04
MKII : Flashing...
MKII : Finalizing...
cmt-algo Flash done
MKII : Sending config for [cmt-mcusw]
-> Ver I : 9.2.2011.51
-> Ver T : RM-696
MKII : Init pipe 05
MKII : Flashing...
MKII : Finalizing...
cmt-mcusw Flash done
MKII : Sending config for [xloader]
-> Ver I : 2.3.6+0m7
-> Ver T : RM-696
-> Ver H : 1501 , 1502
MKII : Init pipe 06
MKII : Flashing...
MKII : Finalizing...
xloader Flash done
MKII : Sending config for [secondary]
-> Ver I : 2.3.6+0m7
-> Ver T : RM-696
-> Ver H : 1501 , 1502
MKII : Init pipe 07
MKII : Flashing...
MKII : Finalizing...
secondary Flash done
Switch : OSSO UART+USB
Version : DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
Update SW release Ok
Done!
Elapsed: 00:07:52
Connect phone on selected interface...
الجهاز كمل واشتغل تمام مشكور اخي
رد: n9 الجهاز بهنيج
رد مع اقتباس
المفضلات