لدي مشكل مع هاتف و هذا لوج العملية
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung S5570 V1.0.4860.51146]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 4 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x203C10E1, IR Length = 0x40 bits
Total IR length: 0x0040 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x203C10E1: Qualcomm MSM7227, H/W Rev. #2
ولكن عند المحاولة الاصلاح
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung S5570 V1.0.4860.51146]

Connecting to the dead body...FAILED
None is detected.
فما الحل