مشكل عند تفليش نوكيا 105
1 file(s) embedded into image.
Booting X-Gold via ASC (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 921600bps...
Baudrate Accepted (921600bps)
Failed to Process E-Gold Command -> EBL Transaction Failed (protocol error)
Failed to process Image File -> Failed to get Flash Chip Details, probably Flash Chip damaged!
Box VPP disabledFailed to Flash -> Problem with processing MCU Image file
رد مع اقتباس
رد: مشكل عند تفليش نوكيا 105
المفضلات