card found: S/N 2B
registered to: mahmoood
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
-> File : RM-750_M015.011.emmc.fpsx not found! Check it!
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_111.021.0028_79u_prd.core.fpsx
PPM : RM-750_111.021.0028_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-750_111.021.0028_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM-750_v0.017_APEONLY_prd.fpsx
APE : RM-750_111.021.0028_U06.01_79u.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing RM-750_111.021.0028_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing RM-750_111.021.0028_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 499 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [PPM]===
Erase : Processing RM-750_111.021.0028_13.01_MEA_A_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_111.021.0028_13.01_MEA_A_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 201 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-750_111.021.0028_C04.01_MEA_1_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_111.021.0028_C04.01_MEA_1_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [CNT]===
Erase : Processing RM-750_v0.017_APEONLY_prd.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_v0.017_APEONLY_prd.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 17 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [APE]===
Erase : Processing RM-750_111.021.0028_U06.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing RM-750_111.021.0028_U06.01_79u.uda.fpsx
Total writen 552 blocks
TIME : Write time : 00:00:17
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:49
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia N00
Software Info: V 79u_sr1_12w20.1.2 30-07-12 RM-750 (c) Nokia
IMEI: 12345610654321?
Ape Version: 111.021.0028
Product code: 059J8V3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Battery voltage is enough for start
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:01:13
Connect phone on selected interface...
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Seek file for this phone....
- > RPL backup found, but not full (NPC/SimLock absent) !!!
- > Make RPL read from Alive/Dead , Make FlashRead
- > Or check "Skip Bak.Chk."
Stopping operation...
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
-> File : RM750_005_000_M015_2G.fpsx not found! Check it!
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom
-> Boot fail...
Flashing failed...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Elapsed: 00:00:14
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia N00
Software ver : V 79u_sr1_12w20.1.2 30-07-12 RM-750 (c) Nokia
IMEI : 12345610654321?
XappVer : 00000672
Ape Ver : 111.021.0028
APE Var : 111.021.0028111.021.0028.13.01111.021.0028.C04.01
APE ADSP: 256
DSP Ver : 79u_sr1_12w20_1
APE Test: RM-750_011.010v0.017
PPM :
CNT :
Product SN : 0
Product code : 059J8V3
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 3696 mV
APE BT: HCI Version 4 (rev. 192). LMP Version 4 (rev. 16651). Manufacturer 15.
APE HW: 256
Lock info ===========
IMEI : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 31 F2
Unable to read Lock table...
IMEI DAMAGED!!! CRT308 save skipped...
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
-> Cert Earse can be done only in DEAD mode, Check DEAD mode, and connect powered OFF phone
Phone disconected!
Connect phone on selected interface...
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Seek file for this phone....
- > RPL backup found, but not full (NPC/SimLock absent) !!!
- > Make RPL read from Alive/Dead , Make FlashRead
- > Or check "Skip Bak.Chk."
Stopping operation...
Connect phone on selected interface...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Elapsed: 00:00:11
Connect phone on selected interface...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: Preparing for erase certificates...
Erase NPC... Ok
Erase CCC... Ok
Erase HWC... Ok
ADL: Erase Flash certs done!
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia N00
Software ver : V 79u_sr1_12w20.1.2 30-07-12 RM-750 (c) Nokia
IMEI : 12345610654321?
XappVer : 00000672
Ape Ver : 111.021.0028
APE Var : 111.021.0028111.021.0028.13.01111.021.0028.C04.01
APE ADSP: 256
DSP Ver : 79u_sr1_12w20_1
APE Test: RM-750_011.010v0.017
PPM :
CNT :
Product SN : 0
Product code : 059J8V3
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 3693 mV
APE BT: HCI Version 4 (rev. 192). LMP Version 4 (rev. 16651). Manufacturer 15.
APE HW: 256
Lock info ===========
IMEI : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 31 F2
Unable to read Lock table...
IMEI DAMAGED!!! CRT308 save skipped...
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Read and Check phone data...
IMEI DAMAGED : Check impossible, Live status : BAD
------------------------
IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3698 mV
-> Batery voltage less, than 3,8V (3698mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\000000000000000_SIM.rpl
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:00:10
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Elapsed: 00:00:16
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Elapsed: 00:00:23
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... Ok
SL3 Simlock Sign read ... Ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3684 mV
-> Batery voltage less, than 3,8V (3684mV). Continue at user risk
-> Downgrade attempt detected
-> Continue by user request...
Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\000000000000000_SIM_2nd.rpl
=== SW Version Check ===
- > DOWNGRADE DETECTED!!!
- > Download latest Flash Files version and try again!
- > Stop killing phone, break flashing!
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:00:11
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : Dead-Test
Check FlashFiles, Please, wait...
Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353677051062527
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\353677051062527_CRT_2nd.rpl
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:00
Reboot phone now...
Afterflash not selected, skip
Done!
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:00:10
Connect phone on selected interface...
Core : v1.65 , BB5XG FlashEngine : v4.2
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-750_011.033_71i92_prd.core.fpsx
PPM : RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
PPM2 : RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CNT : RM-750_v0.007_APEONLY_prd.fpsx
APE : RM-750_011.033_U06.01_71i92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing RM-750_011.033_71i92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing RM-750_011.033_71i92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 512 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [PPM]===
Erase : Processing RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_011.033_13.01_MEA_A_71i92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 181 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_011.033_C04.01_MEA_1_71i92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [CNT]===
Erase : Processing RM-750_v0.007_APEONLY_prd.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-750_v0.007_APEONLY_prd.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 17 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
===Flashing [APE]===
Erase : Processing RM-750_011.033_U06.01_71i92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing RM-750_011.033_U06.01_71i92.uda.fpsx
Total writen 387 blocks
TIME : Write time : 00:00:13
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:44
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia N00
Software Info: V 79u_sr1_11w42 18-10-11 RM-750 (c) Nokia
IMEI: 12345610654321?
Ape Version: 011.033
Product code: 059J8S7
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Battery voltage is enough for start
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Elapsed: 00:01:04
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 9E7C0004FFFF7C40C5DFA6B1A644B3827E654B06
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : F4C2F0A6BA76F178E59EBE710A8E1C85F3E122C0
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
رد: مشكلة في جوال rm-750
أحمد ضيف الهواري شَكر
رد مع اقتباس
المفضلات