اس على التاخير بسسبب انقطاع الانترنت............... الجهاز بعمل سوفت وير نظامي على البيست بوضع الميت ولا يعمل ولا شيك ولا انفو موجود ملف الاربي ال فقط ولكن لا يقلع ولكن عن الضغط على البور بشكل مستمر يرج الجهاز ثلاث رجات ولا يظهر شيئ على الشاشة
card found: A1B5CCE8
registered to: CycloneBox
Connect phone on selected interface...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-596_011.007_79.92_prd.core.fpsx
PPM : RM-596_011.007_06.01_Scandinavia_79.92_prd.rofs2.fpsx
PPM2 : RM-596_011.007_00.01_79.92_prd.rofs3.fpsx
CNT : RM-596_011.007_U01.01_79.92_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 169002085BA70344DC37F81B19D3CB3F1940EAD1
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:10
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
ADL: Check mode
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
===Flashing [MCU]===
Erase : Processing RM-596_011.007_79.92_prd.core.fpsx
Partitioning....
Partitioning error! Phone Not respond!
Connect phone on selected interface...
Elapsed: 00:00:52
Connect phone on selected interface...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-596_011.007_79.92_prd.core.fpsx
PPM : RM-596_011.007_06.01_Scandinavia_79.92_prd.rofs2.fpsx
PPM2 : RM-596_011.007_00.01_79.92_prd.rofs3.fpsx
CNT : RM-596_011.007_U01.01_79.92_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 169002085BA70344DC37F81B19D3CB3F1940EAD1
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355361041413292
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : D:\Infinity Best V1.55 BY SANJEEV CHAUHAN_2\Infinity Best V1.55 BY SANJEEV CHAUHAN\Infinity Best\Backup\Cert\355361041413292_CRT_2nd.rpl
===Flashing [MCU]===
Erase : Processing RM-596_011.007_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_011.007_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 540 blocks
TIME : Write time : 00:00:26
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [PPM]===
Erase : Processing RM-596_011.007_06.01_Scandinavia_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_011.007_06.01_Scandinavia_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 175 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-596_011.007_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_011.007_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [CNT]===
Erase : Processing RM-596_011.007_U01.01_79.92_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_011.007_U01.01_79.92_prd.uda.fpsx
Total writen 229 blocks
TIME : Write time : 00:00:09
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:46
Reboot phone now...
- > AfterFlash Failed!
Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:03:09
Connect phone on selected interface...
n8 مات بعد السوفت وير......
king of Royal شَكر
رد مع اقتباس
المفضلات